Linksys Tribox SPA400 Integration Manual page 6

Step 5 – Configure Trixbox Trunk.
Open your FreePBX interface:
Select Trunks -> Add SIP trunk
Complete the form with the details below:
----------------------------------------------------------------------
Outbound Caller ID: Blank
Never Override CallerID : Unticked
Maximum Channels: (the number of pstn lines plugged into the
Dial Rules: Leave Empty
Outbound Dial Prefix: Empty
Trunk Name: SPA400 (Can be anything you wish)
Peer Details:
USER Context: Leave Blank
USER Details: Blank (Delete the default information)
Register String:
SPA400@x.x.x.x/SPA400
-----------------------------------------------------------------------
Note : x.x.x.x should be where you enter the IP address of the
SPA400
Click Submit Changes.
http://trixbox.ip/admin/
SPA400)
allow=ulaw
canreinvite=no
context=from-trunk
dtmfmode=rfc2833
host=x.x.x.x
insecure=very
type=friend
user=SPA400