Chapter 9: Installing The Driver For The Usb Adapter; Overview; Windows 98 - Linksys Instant PowerLine PLEBR10 User Manual

Chapter 9: Installing the Driver
for the USB Adapter

Overview

After installing your USB Adapter in your computer, you will install the net-
work driver. The installation procedure for the network driver will vary depend-
ing on which operating system you are using on your computer. Proceed to the
instructions for your operating system: Windows 98, 2000, Millennium, or XP.

Windows 98

1. Windows 98 will automatically detect the presence of the USB Adapter
hardware in your computer once you have completed the hardware installa-
tion. Click the Next button.
18
Instant PowerLine
Figure 9-1
Series EtherFast
TM
2. Click the radio button next to Search for the best driver for your device.
(Recommended).
3. Windows will look for new drivers and ask you which locations you want
to search. Select Specify a location:, and enter C:\Program
Files\Linksys\USB Drivers in the location field (if "C" is the letter of your
hard drive). Click the Next button to continue.
10/100 Bridge and USB Adapter
®
Figure 9-2
Figure 9-3
19