Samsung HT-J4500 User Manual page 28

Playing Content
- When it is exposed to electrical interference
from same frequency-band devices including
medical equipment, microwave ovens, and
wireless LANs.
• Pair the Home Cinema with the Bluetooth
device while the two are close together.
• The further the distance is between the Home
Cinema and the Bluetooth device, the worse
the quality is.
If the distance exceeds the Bluetooth
operational range, the connection is lost.
• In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.The Home
Cinema has an effective reception range of
up to 10 meters in all directions if there are no
obstacles. The connection will be automatically
cut off if the device is out of this range. Even
within this range, the sound quality may be
degraded by obstacles such as walls or doors.
• This wireless device may cause electrical
interference. during its operation.
To Connect the Home Cinema to a Bluetooth
Device
Bluetooth device
Before you begin, confirm that the Bluetooth
device supports the Bluetooth compliant stereo
headset function.
1. Press the FUNCTION button on the remote
control to display the BT message.
2. Select the Bluetooth menu on the Bluetooth
device you want to connect. For instructions,
refer to the Bluetooth device's manual.
3. Select the Stereo headset menu on the
Bluetooth device.
• You will see a list of devices.
4. Select "[HTS]JXXXXX" from the searched list.
• When the Home Cinema is connected to
the Bluetooth device, the device name of
the connected Bluetooth device, followed
by the name of home cinema will appear
on the front display of home cinema.
5. Play music on the connected device.
• You can listen to the music playing on the
connected Bluetooth device over the Home
Cinema system.
Connect
28
- English
The Home Cinema only supports Middle
✎
Quality SBC data (up to 237kbps@48kHz),
and does not support High Quality SBC data
(328kbps@44.1kHz).
The AVRCP feature is supported. It's
✎
functionality will differ, depending on the
specifications of the connected device.
Connect only to a Bluetooth device that
✎
supports the A2DP Profile.
Only one Bluetooth device can be paired at a
✎
time.
The search or connection functions may not
✎
work properly in the following cases:
- If there a strong electric field near or around
the home cinema.
- If several Bluetooth devices are
simultaneously paired with product.
- If the Bluetooth device is turned off, not in
place, or malfunctions.
Note that such devices as microwave ovens,
wireless LAN adapters, fluorescent lights, and
gas stoves use the same frequency range as
the Bluetooth device, and can cause electric
interference.
For the best operational compatibility between
✎
the home cinema and a Bluetooth device or
any other device, such as a Mobile Phone, we
recommend you update the device's OS to the
latest version.
To Disconnect the Bluetooth Device from the
Home Cinema
You can disconnect the Bluetooth device from
the Home Cinema. For instructions, refer to the
Bluetooth device's manual.
• When the Home Cinema is disconnected from
the Bluetooth device, the Home Cinema will
display DISCONNECTED on the front display.
To Disconnect the Home Cinema from the
Bluetooth Device
Press the ( ) button on the front panel of the
Home Cinema to switch from BT to another mode
or turn off the Home Cinema.
• Except when you disconnect the Home Cinema
by changing functions, the connected Bluetooth
device will wait a certain time for a response
from the Home Cinema before terminating the
connection. (Disconnection time may differ,
depending on the Bluetooth device.)
In Bluetooth connection mode, the Bluetooth
✎
connection will be lost if the distance
between the Home Cinema System and the
Bluetooth device exceeds 10 meters. When
the Bluetooth device comes back into effective
range or you restart the Bluetooth device,
you have to pair the device and home cinema
again to reconnect.