Remote Control Effective Range - ViewSonic PJD6350 User Manual

Hide thumbs Also See for PJD6350:

User manual (15 pages)

Table Of Contents

Table of Contents

To switch the code for the remote control, press ID set and

the number button corresponding to the remote control code

set in the projector OSD together for 5 seconds or more.

The initial code is set to 1. When the code is switched to 8,

the remote control can control every projector.

If different codes are set on the projector and remote control,

there will be no response from the remote control. When that

happens, switch the code for the remote control again.

Using the remote mouse control

The capability of operating your computer with the remote control gives you more

flexibility when delivering presentations.

Connect the projector to your PC or notebook with a USB cable prior to using the

remote control in place of your computer's mouse. See

page 18

for details.

Set the input signal to D-Sub / Comp. 1 or D-Sub / Comp. 2.

Press Mouse on the remote control to switch from the normal mode to the mouse

mode. An icon appears on the screen to indicate the activation of the mouse mode.

Perform the desired mouse controls on your remote control.

•

To move the cursor on the screen, press

•

To left-click, press

•

To right-click, press

•

To operate your display software program (on a connected PC) which responds to

page up/down commands (like Microsoft PowerPoint), press PgUp/PgDn.

•

To return to the normal mode, press Mouse again or other keys except for the

mouse related multi-function keys.