Standard Settings; Viewing The System Setup Screens - Dell SmartPC 100N Owner's Manual

FILE LOCATION: S:\SYSTEMS\Tang\owner\EMF\A00\8P550c40.fm
Environmental (continued)
Storage
Maximum vibration:
Operating
Storage
Maximum shock: (measured with HDD in head-parked position and 2 ms half-sine
pulse):
Operating
Storage
Altitude (maximum):
Operating
Storage

Standard Settings

The system setup program contains the standard settings for your
computer.
NOTICE: Unless you are an expert computer user or are directed to do so by
Dell technical support, do not change the settings for this program. Certain
changes might make your computer work incorrectly.

Viewing the System Setup Screens

Turn on (or restart) your computer.
1
When the Dell™ logo appears, press
2
If you wait too long and the Windows
until you see the Windows desktop. Then shut down your computer
(see page 20) and try again.
Depending on your computer, you may also be able to enter the system
setup program by pressing
running.
DE LL CO NF I DE NTI A L – PR E LI M I N ARY 3/11 /02
5% to 95% (noncondensing)
0.9 GRMS
1.3 GRMS
122 G
163 G
–15.2 to 3048 m (–50 to 10,000 ft)
–15.2 to 10,668 m (–50 to 35,000 ft)
immediately.
®
logo appears, continue to wait
at any time while the computer is
A ppe ndix 67