Configuration Files Management Commands - NEC SOPHO IP 5000 Command Reference Manual

3.8

Configuration Files Management Commands

display current-
configuration
Command Reference Guide
Description
Using the tftp-server acl command, you can set the number of ACL permitting
the access to a TFTP server.
For related command, see tftp.
Example
Set the number of ACL permitting the access to the TFTP Server to 1.
[NEC-PHILIPS] tftp-server acl 1
Syntax
display current-configuration [ controller | interface interface-type [
interface-number ]
| configuration [ rip | ospf | bgp | post-config | system | user-interface ] ] [ |
[begin | include | exclude ] string ]
View
Any view
Parameter
controller: Displays the configuration of controller.
interface: Displays the configuration of the interface.
interface-type: Interface type.
interface-number: Interface number
configuration: Displays the specified configurations.
rip: Displays the RIP configuration.
ospf: Displays the OSPF configuration.
bgp: Displays the BGP configuration.
post-system: Displays the greeting message configuration.
system: Displays the system configuration.
user-interface: Displays the user interface configuration.
|: Uses regular expression to filter the router configurations.
begin: Displays the configurations beginning with the specified characters
(string).
include: Displays the configurations including the specified characters (string).
exclude: Displays the configurations excluding the specified characters (string).
string: Characters of the regular expression.
SOPHO
IP 5000/SOPHO IP6000
65