Electronic Clock And Oven Control - Maytag CRE9900ACB Owner's Manual

RANGE CONTROL PANEL
ELECTRONIC CLOCK AND OVEN CONTROL
The electronic dock and oven control on your
Cancel Pad
Maytag range is used for the time-of-day clock,
Press this pad to cancel all operations except the
timer, bake, broil, delay- start and self-clean time-oLday eloek and timer. If you are ever
functions. A beep will sound each time a unsure if you've programmed the control
function Fad is pressed. At the end of an cx_rrectly7 press tile CANCEL Fad and start over.
operation, consecutive beeps will sound.
The display on the control x_dllblink when power Set Knob
is first supplied to the range or if there is a power Turn this knob in either direction to enter tbe
failure. Once the time-of-day clock has been set time or temperature desired. This knob is also
(see Setting the Clock, page 6), the display will used to seleet Hi or Lo broil.
stop blinking.
Timer Pad
NOTE: The electronic eontr61 is equipped The timer can be set from 5 seconds to 9 hours,
with a self-diagn0st! c feature £or se_ee 50 mimltes. It will count down by minutes (when
ONLY. If a fault code (F pI_ a number, :eX: F !) set for 1 hour or more time) or seconds (when
appears in the diSp!_" alo_g,Mtb a ContinuOUs set for less than 1 hour). See page 6 for
beeping sound, press the CANCEL pad: S_ instructions on setting the timer.
Bel0re Yon Call for Service
(page
24) if the
fault code reappears in t}le display: , :i Clock Pad
Use this pad to set the time-of-day clock. For
The following pads and knobs are found on your instructions to do this, see page 6.
Maytag electronic clock and oven control:
PAGE 5