Connecting The Receiver - Cisco ISB7105 Installation Manual

Connecting the Receiver

To connect your receiver to your network and home entertainment devices, complete
these steps.
Because the connections
for a high-defi nition (HD)
or standard-defi nition (SD)
TV are diff erent, you must
1
determine if your TV is HD
or SD. Your TV must
receive HD signals for
you to enjoy the benefi ts of HDTV. Refer to the manual that came with your TV
for more information. See page 25 for more information on picture formats.
Make the connections for your TV, VCR, and DVD recorder as follows:
• If you are using an HDTV, see page 13 and the connection diagrams in
this manual.
2
• If you are using a standard-defi nition TV, see page 14 and the
connection diagrams in this manual.
• If you want to record some programs on VCR tape or DVD, see page 15
and the connection diagrams in this manual.

Identify the additional
consumer electronic devices
you will connect to the
receiver and TV. See pages
3
16 through 22 and refer to
the owner's manual for the
device.
Plug the receiver and the TV into an AC power source that is not
controlled by a switch. For further instructions on completing your setup,
contact your service provider.
4
10
16
9
VCR
Home Theater
4
or 3
DVD
Other