Solving Recovery Problems; Creating And Using Rescue Media - Acer Lenovo 3000 J Series User Manual

Notes:
1. After restoring a hard disk to the original factory contents you might have to
2. Some computers come with Microsoft Office or Microsoft Works preinstalled. If

Solving recovery problems

If you are unable to access the Rescue and Recovery workspace or the Windows
environment, you can:
v Use your rescue media (CD, DVD, or USB hard disk) to gain access to the
v Use a Recovery Repair diskette to repair the Rescue and Recovery workspace or
v If your intent is to restore the contents of the hard disk to its original factory
It is important to create a Recovery Repair diskette, rescue media, and a set of
Product Recovery discs as soon as possible and store them in a safe place as a
precautionary measure.
If you are unable to access the Rescue and Recovery workspace or the Windows
environment from rescue media, a Recovery Repair diskette, or a set of Product
Recovery CDs, you might not have the rescue device, CD drive, DVD drive or USB
hard disk drive defined as a startup device in the BIOS startup sequence. See
"Setting a rescue device in the startup sequence" on page 44 for more information.

Creating and using rescue media

Rescue media such as a CD or USB hard disk drive enables you to recover from
failures that prevent you from gaining access to the Rescue and Recovery
workspace on your hard disk.
Note: The rescue disc, the first disc of the Product Recovery discs and the backup
To create rescue media, do the following:
1. From the Windows desktop, click Start, click All Programs, click Lenovo Care,
42
User Guide
Note: After restoring your hard disk to the original factory content, you
might have to reinstall some software or drivers. Refer to the
following notes for more information.
v For information about other features of the Rescue and Recovery workspace,
click Help.
reinstall device drivers for some devices. See "Recovering or installing device
drivers" on page 44.
you need to recover or reinstall your Microsoft Office or Microsoft Works
applications, you must use the Microsoft Office CD or Microsoft Works CD. These
CDs are provided only with computers that come with Microsoft Office or
Microsoft Works preinstalled.
Rescue and Recovery workspace. See "Creating and using rescue media" for
details.
repair a file needed to enter the Windows environment. See "Creating and using
a Recovery Repair diskette" on page 43 for details.
state, you can use a set of Product Recovery discs. See "Creating and using
product recovery discs" on page 39.
discs are startable (bootable). They can be started in any type of CD or DVD
drive except for a DVD-RAM media.
then click Create Recovery Media.