Canon IB4000 series Online Manual page 365

Click Ethernet, then see Ethernet ID to confirm the MAC address.
Checking If the Computer and the Printer, or Computer and the
Access Point Can Communicate
To check that communication is available, perform the ping test.
1. Open the Utilities folder in the Applications folder.
2. Start Network Utility.
3. Click the Ping button.
4. Make sure that Send only XX pings (XX are numbers) is selected.
5. Enter the IP address of the target printer or the target access point in Enter the network
address to ping..
6. Click Ping.
"XXX.XXX.XXX.XXX" is the IP address of the target device.
A message such as the following is displayed.
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms
64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms
--- XXX.XXX.XXX.XXX ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
If the packet loss is 100%, the communication is not available. Otherwise, the computer is
communicating with the target device.
Checking the Network Setting Information
To check the network setting information of the printer, print out the network setting information using the
operation panel of the printer.
Printing Out Network Setting Information
365