Advertisement
SURFboard
DOCSIS
3.0 Cable Modem
®
Install Sheet
LED Operation
Front Panel LEDs
MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. SURFboard is a registered trademark of Motorola Mobility, Inc. All other product or service names
are the property of their respective owners. No part of the contents of this document may be reproduced or transmitted in any form or by any means without the written permission of the publisher.
© 2011 Motorola Mobility, Inc. All rights reserved.
582612-001-a 05/2011
SB6141
®
Front Panel LED Icons
During normal operation, the
POWER, RECEIVE, SEND,
and ONLINE LEDs should
always be ON. LINK LED will
FLASH during data transfer.
Note: During the start up
process, the LEDs will
FLASH and then turn ON in
sequence. If an LED turns
ON and the next LED does
not FLASH, please contact
your service provider.
ICON
Green (ON): Indicates power to the modem is properly connected
Green (ON): Indicates a downstream (receive data) channel
connection
Blue* (ON): Indicates a bonded downstream (receive data) channel
connection
Green (ON): Indicates an upstream (send data) channel connection
Blue* (ON): Indicates a bonded upstream (send data) channel
connection
Green (ON): Indicates Internet connectivity
Amber (ON): Indicates a device, computer, or router is connected
to the Ethernet port and is operating in Ethernet (10Base-T) or Fast
Ethernet (100Base-T) mode
Blue* (ON): Indicates a device, computer, or router is connected to
the Ethernet port and is operating in high-speed Gigabit Ethernet
(1000Base-T) mode
*Bonded high-speed data service may not be available in your local area. Check
with your service provider for more information.
LED STATUS
Advertisement
