Network Forwarding; Call Forward Unconditional; Call Forward Busy; Call Forward No Response - Samsung IDCS 28D User Manual

NETWORK FORWARDING

If you system is equipped with the iDCS 500 LE version of software or
iDCS 100 Enhanced Software, and your system is networked with another
system, there are 3 types of forwarding that must be used when you want to
forward calls to a station that is located in another system on your network.
These forwarding types are described below.

CALL FORWARD UNCONDITIONAL

To forward all your calls to a station in another system on your network:
• Lift the handset and dial 608 plus the extension or group number.
• Receive confirmation tone and hang up.
To cancel Call Forward Unconditional, lift the handset and dial 600—OR—
dial another forward code, e.g., 604.

CALL FORWARD BUSY

To forward calls to a station in another system on your network when you
are on the phone:
• Lift the handset and dial 609 plus the extension or group number.
• Receive confirmation tone and hang up.
To cancel Call Forward Busy, lift the handset and dial 600—OR—dial anoth-
er forward code, e.g., 604.

CALL FORWARD NO RESPONSE

To forward calls to a station in another system on your network when you do
not answer:
• Lift the handset and dial 60* plus the extension or group number.
• Receive confirmation tone and hang up.
To cancel Call Forward No Response, lift the handset and dial 600—OR—
dial another forward code, e.g., 604.

DIALING FEATURES

SPEED DIALING

You can dial a preprogrammed telephone number stored in the system-wide
speed dial list of numbers 500–999 or from your personal list of numbers
00–49:
• With the handset on-hook, press the MEMORY key or dial 16.
• Dial the desired speed dial number.
• The telephone number is automatically dialed for you.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKER key before you begin dialing.
PROGRAMMING PERSONAL SPEED
DIAL NUMBERS
You can program frequently dialed telephone numbers in a personal speed
dial list. A station may be assigned up to fifty numbers, 00–49. See your sys-
tem administrator to determine the amount assigned to your station.
• While on-hook, press TRANSFER and then dial 105.
• Dial a speed dial number (00–49).
• Dial a line or line group access code.
• Dial the telephone number to be stored (24 digits maximum). It can in-
clude #, , FLASH and PAUSE.
• Press TRANSFER to store the number.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the
handset or press the SPEAKER key before you begin dialing.
For the purposes of programming speed dial numbers, the programmable
keys are known as A, B, C, D, E and F and are defined below.
28D KEYSET
18D KEYSET
DEFAULT
PROGRAMMING
KEYS LAYOUT
27 28
8D KEYSET DEFAULT
PROGRAMMING
A B
KEYS LAYOUT
C D
VOLUME
E F
A C
Transfer Speaker
B D
Transfer
E
Speaker
F