Switching Off - Miele KFN 14842 SD ed Operating And Installation Instructions

Switching on and off
If the temperature in the freezer section
is above 0 °C, only bars will light up in
the temperature display for the freezer
section. As soon as the temperature is
below 0 °C, the temperature display for
the freezer section will show the current
temperature in the freezer section.
The "Freezing" symbol and the Alarm off
sensor will flash until the temperature in
the freezer section has cooled down to
the correct temperature for freezing.
The appliance will start to cool, and the
interior lighting will come on when the
refrigerator section door is opened.
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer
section until the temperature is at
least -18°C.
You switch between the refrigerator and
freezer sections with this sensor.
If you want to select the freezer section
(to check the temperature, for
example),
20
^ touch the sensor for switching
between the refrigerator and freezer
section until the "Freezing" symbol
lights up yellow.
Depending on which section you have
selected, you can
– select dynamic cooling,
– select either Super cool or Super
freeze, or
– adjust the temperature.
Please refer to the relevant section for
more information.
Cool pack
Place the cool pack in the top freezer
drawer. The cool pack will be at its
most effective after it has been in the
freezer for approx. 24 hours.

Switching off

^ Touch the On/Off sensor until all of
the indicators go out. (If this does not
happen, the safety lock is still
activated).
If the refrigerator section is switched
on, the refrigerator section and freezer
section will switch off one after the
other.
The interior light will not come on when
you open the door and the cooling
process will be switched off.