Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description April 14, 2008 DSM-210 Revision A1 with Firmware version 1.00...
• Disassemble or reverse engineer the device or attempt to derive source code (underlying ideas, algorithms, or structure) from the equipment or from any other information provided by D-Link Systems, except to the extent that this restriction is expressly prohibited by local law.
Page 4
• To protect your device from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS). • Do not modify power cables or plugs. Consult a licensed electrician or your power company for site modifications. Always follow your local/national wiring rules. D-Lnk DSM-210 User Manual...
Page 5
• Do not spill food or liquids on your system components, and never operate the device in a wet environment. If the device gets wet, see the appropriate section in your troubleshooting guide or contact your trained service provider. • Use the device only with approved equipment. • Move product with care. D-Lnk DSM-210 User Manual...
Page 6
Environment • Always position the DSM-210 on a stable and level surface. Unstable surfaces can cause the DSM-210 to fall, resulting in possible damage or injury. • Do not use this device near water (e.g. near a bathtub, sink, laundry tub, fish tank, in a wet basement or near a swimming pool).
Memory Card Slot Insert a memory card with stored pictures to display or copy to the internal memory. The DSM-210 supports Secure Digital (SD), Secure Digital High Capacity (SDHC), MultiMedia Card (MMC), and Memory Stick. Reset Button...
Forward Back During a slide show, During a slide show, Play/Pause press to display the press to display the During a slide show, next picture. previous picture. press to pause or resume. D-Lnk DSM-210 User Manual...
Press to navgate through menu optons, slde shows, and Arrow Keys pctures. Press to accept the current selecton or opton, or press to start/ Enter pause n slde show mode. Press to rotate the mage clockwse 90 each tme button s Rotate pressed. D-Lnk DSM-210 User Manual...
Wireless Installation Considerations The D-Link wireless product lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business.
• To use in horizontal position (as shown), turn the stand counter-clockwise to the H position until the stand locks into place. • To use in vertical (portrait mode) position, turn the stand clockwise to the V position until the stand locks into place. D-Lnk DSM-210 User Manual...
Connect Ethernet Cable If you are connecting the DSM-210 to a wired network, connect an Ethernet cable to the Ethernet port on the DSM-210 and the other end into your router or switch. If you are connecting to a wireless network, you can skip this step.
Configuration This section will show you how to configure your new D-Link Wireless Internet Photo Frame. If you are not going to connect your DSM-210 to a network or to the Internet, and simply want to display pictures from the internal memory, memory card, and/or from an USB thumb drive, then skip to page 16.
Enter. Once the passphrase is complete, select Enter from the on screen keyboard. Note: Allow about a minute for the DSM-210 to connect to your wireless network. Once you connect, you may skip to page 15 to configure/verify your network settings.
If your wireless router or access point supports WPS, you may configure the DSM-210 using the push-button or PIN method. Push-button Method: Press the WPS button on the top of the frame or select the Wi-Fi Protected Setup on-screen button in the upper-right corner and press Enter.
Enter. Once the passphrase is complete, select Enter from the on screen keyboard (see page 11). Note: Allow about a minute for the DSM-210 to connect to your wireless network. Once you connect, you may skip to page 15 to configure/verify your network settings.
By default, the picture frame is set to wireless mode. To connect to your network using an Ethernet cable, you must set the picture frame to wired mode. Once the DSM-210 is powered on, use the remote control to navigate to the Setup icon.
Network Settings By default the DSM-210 is set to DHCP, allowing your network settings to be automatically configured from your router or DHCP server. Most networks have DHCP enabled. If you are not sure, please verify your router’s settings. If you would like to manually enter your network information, select Static and press Enter. Enter the IP settings and select OK to save.
Viewing Pictures Your DSM-210 can display your pictures from its internal memory and external sources such as USB thumb drives, memory cards, media servers, and Internet services such as FrameChannel. Insert External Memory Card To view or copy images to the internal memory from a memory card or USB thumb drive, simply insert your USB thumb drive into the USB port and/or insert your memory card into the memory card slot located on the left side of the frame.
Select from Storage To view images from the internal memory, USB thumb drive, or memory card, highlight the Frame Memory icon. A list of available sources will be displayed. Select a source and press Enter. D-Lnk DSM-210 User Manual...
Page 24
During the slideshow, press Menu to set the transition type and scaling type. If you are viewing from a memory card or USB thumb drive, there will be a Save to Favorites option. This will copy the image to the DSM-210’s internal memory.
If you have any UPnP-AV servers, such as a PC running Windows Media Player 11* or a Network Attached Storage (NAS) device on your network, you may select the shared photos to be displayed on your DSM-210. Select the Home Network icon and a list of available Media Servers will be listed. Select the server you want to connect to and press Enter.
Page 26
All shared content will appear. Select the pictures you want to display on your DSM-210. During the slideshow, press Menu to set the transition type and scaling type. There will also be a Save to Favorites option. This will copy the image to the DSM-210’s internal memory.
In order to share photos to your DSM-210 using Windows Media Player 11, you must first allow your ® DSM-210 access in the software. Launch Media Player 11 and click the down arrow under Library and select Media Sharing. D-Lnk DSM-210 User Manual...
Page 28
Click the Share my media to: check box. Select your D-Link DSM-210 Digital Photo Frame from the Media Sharing box and then click the Allow button. Your device will now have a green check mark. Click Apply and then click OK.
Page 29
Now you need to add the folders containing photos you want shared with your DSM-210. Click on Library and then click on Add to Library. D-Lnk DSM-210 User Manual...
Page 30
Add button and select each folder manually. Once you have added the folder(s) you want to share click OK. Windows Media Player 11 will now search for supported media files in the folders you selected to share. ® D-Lnk DSM-210 User Manual...
Page 31
Once you have confirmed that your Windows Media Player sharing has been enabled and is showing on your ® DSM-210 you can select your photos after selecting the Windows Media Player 11 media server from the Home Network screen. D-Lnk DSM-210 User Manual...
Page 32
If you are using Windows Vista and Media Sharing is disabled, follow these steps to enable media sharing: ® Open Windows Media Player 11. Click the down arrow under Library and select Media Sharing. Click the Networking button. D-Lnk DSM-210 User Manual...
Page 33
Click the Customize button. Select Private under Location Type. Click the Next button. D-Lnk DSM-210 User Manual...
Page 34
Click the Close button. Media sharing should now be accessible from your Windows Vista ® D-Lnk DSM-210 User Manual...
Facebook, Flickr, Picasa, and more. Your frame will automatically update when changes are made to any of your photo sharing sites. Your DSM-210 can display the instructions to setup a FrameChannel account. On the DSM-210 select Online Content and then click on Instructions. For more details, follow the steps below: 1.
Page 36
Note: It is recommended to note down all your account information for future log-on purposes. Click Save & Continue to proceed. 5. Enter the remaining information for your account and click Save & Continue to proceed. D-Lnk DSM-210 User Manual...
Page 37
6. You may invite your friends to join or click I’m done! to enjoy your FrameChannel experience. 7. From your DSM-210 Digital Photo Frame, refresh the Online Content by clicking BACK on your remote. You will be able to see all the created channels on your frame.
Page 38
During the slideshow, press Menu to set the transition type and scaling type. There will be a Save to Favorites option. This will copy the image to the DSM-210’s internal memory. During the slideshow, you can pause and navigate using the touch buttons on the lower-front of the frame.
Upgrade Firmware Your frame must be connected to the Internet to perform an upgrade. When connected, the DSM-210 will automatically notify you if a firmware upgrade is available. If there is an upgrade available, the Upgrade Firmware icon will be displayed.
When viewing images you can change the transition type. Transition types are animations that are displayed when a picture changes to the next picture during a slide show. While in a slide show, press Menu and then select Set Transition. A list of transitions will appear. Select a type and press Enter. D-Lnk DSM-210 User Manual...
While in a slide show, press Menu and then select Set Scaling. You can change how the picture fits on your frame. Select Scale with no Cropping, Stretch to fill Screen, or Crop to fill Screen. D-Lnk DSM-210 User Manual...
Select the Setup icon and then select Reset to Factory Defualt. This will allow you to reset the frame to the default settings, erase the internal memory (favorites), or both. Select which option you want and press Enter. D-Lnk DSM-210 User Manual...
Motion Sensor Test Select the Setup icon and then select Motion Sensor Test. This will allow you to verify that the motion sensor on your DSM-210 is working properly. The test program will do the following: • Draw green lines if there is no motion.
About Select the Setup icon and then select About. This will display the information about your frame including the current version of firmware that is installed. D-Lnk DSM-210 User Manual...
D-Link offers a Widget to use with your DSM-210 frame. The D-Link Widget requires Yahoo Widgets to be installed in your PC. If you already have Yahoo Widgets installed, just load the D-Link widget from the CD included with your DSM-210.
Page 46
4. Select the Aspect Ratio (Widescreen or Standard). 5. Click Save to save your settings. You may now add photos from your computer to the DSM-210’s internal memory by dragging and dropping the photos into the widget. D-Lnk DSM-210 User Manual...
• 1GB 1-Year Limited SUPPORTED MEMORY FORMATS • SD (Secure Digital) * 1-Year Limited Warranty available only in the USA and Canada. • SDHC • MMC (Multimedia Card) • Memory Stick SUPPORTED PHOTO FORMAT • JPEG D-Lnk DSM-210 User Manual...
• Hardware Revision (located on the label on the back of the frame (e.g. rev A1)) • Serial Number (s/n number located on the label on the back of the frame). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.
Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
Page 50
Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link;...
Page 51
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt.
RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT.
The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Lnk DSM-210 User Manual...
Page 54
This device has been designed to operate with an antenna having a maximum gain of 2dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. D-Lnk DSM-210 User Manual...
Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 April 14, 2008 D-Lnk DSM-210 User Manual...