Cisco WAP131 Administration Manual page 58

Administration
Packet Capture
STEP 4
Cisco WAP131 and WAP351 Administration Guide
- Radio 1/Radio 2—802.11 traffic on the radio interface.
- Ethernet—802.3 traffic on the Ethernet port.
- Radio 1 - VAP0/Radio 2 - VAP0—VAP0 traffic.
- Radio 1 - VAP1 to Radio 1 - VAP3 (if configured)—Traffic on the
specified VAP.
- Radio 2 - VAP1 to Radio 2 - VAP3 (if configured)—Traffic on the
specified VAP.
- Radio 1 - WDS0 to Radio 1 - WDS3 (if configured)—Traffic on the
specified WDS.
- Radio 2 - WDS0 to Radio 2 - WDS3 (if configured)—Traffic on the
specified WDS.
- Brtrunk—Linux bridge interface in the WAP device.
• Capture Interface (For WAP351 Only)—Enter a capture interface type for
packet capture:
- Radio 1/Radio 2—802.11 traffic on the radio interface.
- LAN1 to LAN5—802.3 traffic on the Ethernet port.
- Radio 1 - VAP0/Radio 2 - VAP0—VAP0 traffic.
- Radio 1 - VAP1 to Radio 1 - VAP7 (if configured)—Traffic on the
specified VAP.
- Radio 2 - VAP1 to Radio 2 - VAP7 (if configured)—Traffic on the
specified VAP.
- Radio 1 - WDS0 to Radio 1 - WDS3(if configured)—Traffic on the
specified WDS.
- Radio 2 - WDS0 to Radio 2 - WDS3(if configured)—Traffic on the
specified WDS.
- Brtrunk—Linux bridge interface in the WAP device.
• Capture Duration—Enter the time duration in seconds for the capture. The
range is from 10 to 3600. The default is 60.
• Max Capture File Size—Enter the maximum allowed size for the capture file
in kilobytes (KB). The range is from 64 to 4096. The default is 1024.
Click Save. The changes are saved to the Startup Configuration.
3
58