Casio 2465 User Manual

USER'S GUIDE 2465
General Guide
• Press C to change from mode to mode.
• In any mode, press L to illuminate the display.
Timekeeping Mode
Mode indicator
Press
Timekeeping
Use the Timekeeping Mode to set and view the current time and date. You also
use the Timekeeping Mode to select the display color pattern.
• In the Timekeeping Mode, press D to toggle between the Day of the Week –
Day and the Month – Day screens.
Day of the Week – Day
Press
PM indicator Seconds
Hour : Minutes
To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence
shown below to select other settings.
Seconds
Day Month
3. When the setting you want to change is flashing, press D to change it as
described below.
To change this setting
Perform this button operation
Press D to reset to AA.
Seconds
Press D to toggle between 12-hour (
12/24-Hour Format
( ) timekeeping.
Hour, Minutes, Year, Month, Day Press D to increase the setting.
• Pressing D while the seconds are in the range of 30 to 59 resets them to
AA and adds 1 to the minutes. In the range of 00 to 29, the minutes are
unchanged.
4. Press A to exit the setting screen.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode
is applied in all modes.
• The day of the week is automatically displayed in accordance with the date
(year, month, and day) settings.
Color Pattern Setting
You can select one of four different color patterns for the Timekeeping Mode
display.
To change the color pattern setting
In the Timekeeping Mode, each press of B cycles through available display
color patterns in the sequence shown below.
Blue on white Blue on white
Black on white Red on blue
e-DATA MEMORY
You can use the watch's e-DATA MEMORY to store
e-mail addresses, Web page URLs, and other text
data. e-DATA MEMORY contents are password
protected, which means that no one can view, input,
edit, or delete them without inputting the correct
password.
• All of the operations in this section are performed in
the e-DATA MEMORY Mode, which you enter by
Password
pressing C.
Important!
• Entering the e-DATA MEMORY Mode causes a password input screen to
appear. Input the correct password to access e-DATA MEMORY data.
• The initial factory default password is "0000", which allows free access to
e-DATA MEMORY data without input of a password.
• The figures on the password input screen indicate that the current
password setting is "0000". When another password is set, the
displayed in place of .
• When the password is "0000", you can access e-DATA MEMORY data by
pressing B, without inputting a password. Pressing B displays an e-DATA
MEMORY record screen or remaining memory screen. After that you can
recall, edit, and delete e-DATA MEMORY records.
e-DATA MEMORY Mode
.
Month – Day
.
Hour Minutes
12/24-Hour
Format
Year
) and 24-hour
Red on black Red on black
Black on white Red on blue
is
• The mode indicator uses white on red characters to indicate the watch's
current mode.
Alarm Mode Stopwatch Mode
Using a Password to Protect e-DATA MEMORY Data
You can register a 4-digit password to keep e-DATA MEMORY data secure.
Important!
• A password of "0000" allows anyone to access e-DATA MEMORY data. It is
the same as leaving e-DATA MEMORY data unlocked.
• Use a 4-digit password that is easy for you to remember, but difficult for
others to decipher. If you forget the password, you will not be able to access
the e-DATA MEMORY data without having the watch initialized, which deletes
all data in its memory. To have the watch initialized, contact the store or
dealer where you purchased it, and ask to have the AC operation performed.
To register a new password
1. While
Mode screen, hold down A for about two seconds
until
flashing.
• This is the new password registration screen.
2. Press D to scroll through numbers at the first digit.
3. When the first digit is the number you want, press
B to advance to the next digit.
4. Repeat steps 2 and 3 to input all four digits of the
password you want.
• Pressing A while inputting a new password clears your input and returns
the display to .
5. After all four of the password digits are the way you want, press B to
register it.
• The message appears for about one second, followed by
, which is the password input screen. Input the password you
just registered to access e-DATA MEMORY records. See "To input the
password" for more information.
To input the password
1. When the password input screen is on the display,
input the password.
• Press D to scroll through numbers at each digit.
• Press B to advance to the next digit.
2. After the password is the way you want, press B.
• If the input password matches the one registered,
the message
e-DATA MEMORY record screen (or remaining
memory screen).
• If the password does not match, the message
input screen.
To change the password
1. Enter the e-DATA MEMORY Mode.
2. When the password input screen appears, hold down A for about two
seconds until appears with the first asterisk flashing.
• This is the current password input screen.
3. Input the current password.
• Press D to scroll through numbers at each digit.
• Press B to advance to the next digit.
4. After the password is the way you want, press B.
• If the input password matches the one registered, the message
appears, followed by
password input screen.
• If the password does not match, the message
followed by the current password input screen. Return to step 2 and input
the correct password.
5. Input the new password.
• Press D to scroll through numbers at each digit.
• Press B to advance to the next digit.
6. After the new password is the way you want, press B to register it.
• The message appears for about one second, followed by
, which is the password input screen. Input the password you
just registered to access e-DATA MEMORY records. See "To input the
password" for more information.
Dual Time Mode
is on the e-DATA MEMORY
appears, with the first
appears, followed by an
appears, followed by the password
, which is the new
appears,
1