/ Getting Started
STEP 1
Remove the camera from
the housing.
STEP 2
Remove the camera side door and
insert a microSD card.
(Class 10 or UHS-1 required, sold separately.)
STEP 3
Remove the camera back door and
insert the battery.
STEP 4
Charge the battery using the
included USB cable.
/ The Basics
Shutter/Select Button [
]
Camera Status Light (red)
Camera Status Screen
Power/Mode Button [
]
Wireless On/Off Button [
]
Wireless Status Light (blue)
Camera Status Light (red)
POWERING CAMERA ON AND OFF
To Power On:
Press the Power/Mode button [
To Power Off:
Press and hold the Power/Mode
].
button [
] for two seconds.