How To Switch Between Hotel Tv Mode And Normal Mode - Sharp LC-32HT2U Service Manual

LC-32HT2U

[2] HOW TO SWITCH BETWEEN HOTEL TV MODE AND NORMAL MODE

1. Change from Hotel TV mode to Normal TV mode
1. Keep TV and STB not interconnected.
2. Plug in the AC power cord.
3. Press the MASTER button on the Remote Replicator. The power is automatically turned on.
4. Select MENU, PPV TV and TV MODE in this order.
5. The Selecting Television Mode screen shows up. Select Normal TV.
6. The Password entry screen shows up. Using the Remote Control Unit, enter 2433.
7. [TV will power off after the TV mode change] appears. The power will be turned off automatically soon.
8. Now the set will be in Normal TV mode.
How to change from Hotel TV mode to Normal TV mode
Hotel TV mode
Power-OFF state
STB is not connected to TV.
NO
Disconnect cable between STB and TV.
Insert AC cord in outlet.
Press MASTER button on Remote Replicator.
Press MENU button on Remote Controller.
Select [PPV TV] using Remote Controller.
Select [TV mode] using Remote Controller.
Select [Normal TV] using Remote Controller.
Enter PASSWORD 2433 using Remote Controller.
Wait until TV is turned off.
Change to Normal TV mode.
5 – 18
YES
*1
*2
*2
*2
*2