8-8. Floor standing cabinet
MML-AP0074H✽, AP0094H✽, AP0124H✽, AP0154H✽, AP0184H✽, AP0244H✽
1. Removing the electrical control assembly
CAUTION
Wear the protective gloves when removing.
Failure to observe this precaution may cause injury.
1) Stop the air conditioner and turn off the main power.
2) Remove the two intake grilles. (No fixing screw)
3) Remove the front panel. (2 M4 screws)
4) Remove the discharge grille. (M4 X 20L: 2)
5) Remove the control assembly. (3 M4 screws)
6) Remove the screw fixing the electrical control assembly to the box, and pull it out toward you.
Discharge grille
Front panel
Control assembly (Remote controller assembly)
144
Electrical component
assembly
M4 screw
Intake grille