Av Cba Bottom View - Sharp DV-SL80 Service Manual

AV CBA Bottom View

CAUTION !
Fixed voltage ( or Auto voltage selectable ) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown, check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
WF3
C1402
PLUS LEAD
CAUTION
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD,
REPLACE ONLY WITH THE SAME TYPE FUSE.
WF2 WF1 WF4 WF5
PIN 10 OF PIN 8 OF PIN 14 OF PIN 16 OF
CN1601 CN1601 CN1601 CN1601
1-10-23
WF6
PIN 19 OF
CN1601
NOTE :
The voltage for parts in hot circuit is measured
using hot GND as a common terminal.
1-10-24 BE5942F01011A