Detailed Setup: Weather Station And Remote Sensor; Button Functions; (Down) Button - La Crosse Technology C83332 Instruction Manual

Detailed Setup: Weather Station and Remote Sensor

STEP 1:
 Insert the 5-volt A/C power adapter into the designated area on the
back of the Weather station.
 Plug the A/C power adapter into a wall outlet for continuous
backlight (ON/OFF), and dimmer feature.
STEP 2: (optional battery operation)
Slide tab to down and pull out to remove the battery cover.

Insert three new AAA Alkaline batteries into the back of the weather

station. Observe the correct polarity (see marking inside the battery
compartment).
The weather station will light up and show indoor temperature, humidity and

time.
(Backlight will illuminate for 8 seconds when using only battery power with a press/release of

the SNOOZE/LIGHT button)
Do Not Mix Old and New Batteries

Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries

STEP 3:
 Ensure that the transmitter is within 10 feet of the Weather station.
 Remove battery cover from transmitter. Slide the battery cover down and
lift off the front.
 Insert two new AA batteries into the TX141TH-B transmitter. Observe the
correct polarity.
 Within three minutes, the Weather station will show readings in the outdoor
temperature area on the LCD.
Note: Use Alkaline batteries (or Lithium for temperatures below -20°F/-
28.8°C).
The weather station has 5 buttons across the top and 2 on the front.
Setting-
 Press to decrease values during setting.
 Hold 2 seconds to quickly adjust values.
Default Time Display-
 Press to display minimum temperature/humidity.
 Hold 2 seconds to clear minimum temperature/humidity memory.
Temperature Alert-
 Press to disarm alerts
Model: C83332/C83349

Button Functions

▼ (Down) Button:

www.lacrossetechnology.com/support Page | 4