Screen Menu; Colour Adjustment And Still Image; Eco Mode; Teletext Function - Sharp Aquos LED LC-32LE550M Operation Manual

Setup menu (Continued)
H First time installation
You can set initial auto installation manually.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "
" (Setup).
3 Press a /b to select "First time installation",
and then press ENTER.
4
If you have already set the password, enter it
here.
• See page 9 for setting a password.
5
The language screen appears, and then press
ENTER.
6 Press c / d to select "Home" or "Store", and
then press ENTER.
• The confi rmation screen appears only when selecting
"Store".
Press c / d to select "Yes" or "No".
7
Auto installation will be executed.
You do not need to do anything during the auto
search.
H Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute "Reset", all the settings such as "Picture",
"Sound" and "Setup" will be reset to the factory preset
values.
Screen menu (PC input mode only)
Adjusting the PC image automatically
Auto adjust
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
NOTE
• Auto adjust is likely to succeed when an input PC image
has wide vertical stripes (e.g. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
Adjusting the PC image manually
c o n t r a s t ) .
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto
adjust. In some cases, however, manual adjustment
is needed to optimise the image.
Selected item Description
Centres the image by moving it to the left
H-offset
or right.
Centres the image by moving it up or
V-offset
down.
Adjusts the image size to shrink or
Size
expand.
Adjusts when characters have low
Phase
contrast or when the image fl ickers.
Reset all adjustment items to factory
Position reset
preset values.

Colour adjustment and still image

Allows you to adjust the colour tone of a still image.
1
Press COLOUR ADJ. (FREEZE), the moving
image will be captured and colour adjustment
screen displays.
2 Press a /b/ c / d to adjust the colour to your
desired setting.
• When "Picture mode" is "Dynamic", "Standard" or
"Mild", it will automatically change "Picture mode" to
"Personal".
Button Description
a
White with greenish tone.
b
White with reddish tone.
c
White with bluish tone.
d White with yellowish tone.
R Reveal/hide the setting screen.
G Reset setting.
Close the setting screen and unfreeze
B
image.
ENTER Save/exit setting.
NOTE
• The colour adjustment screen and still image will
automatically goes out after 30 minutes.

ECO mode

This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Selected item Description
ECO 1 Reduces the backlight brightness.
Reduces the backlight brightness more
ECO 2
than "ECO 1".
ECO Off Normal setting of backlight brightness.
ECO status will be displayed on the channel
information window.

Teletext function

What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
News, weather reports, sports information, stock
exchange prices and programme previews are
among the many services available.
Turning on and off Teletext
1
Select a TV channel or external input source
providing the Teletext programme.
2
Press m to display the Teletext.
3
Each time you press m, the screen switches
as shown below.
NOTE
• If you select a programme with no Teletext signal,
"No Teletext" is displayed.
• The same message displays during other modes if
no Teletext signal is available.
Button functions
Buttons Description
CH (r/ s ) Increase or decrease the page number.
Colour (Red/ You can select a group or block of pages
Green/ displayed in the coloured brackets at
Yellow/Blue) the bottom of the screen by pressing
the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control unit.
0 — 9 Directly select any page from 100 to 899
by using 0 — 9.
k (Reveal
To reveal hidden information such as an
hidden for answer to a quiz.
TELETEXT)
3 (Hold)
To stop updating Teletext pages
automatically or release the hold mode.
[ (Subtitle
Display the subtitle during Teletext page.
for • Subtitle will not be displayed when
TELETEXT) the service does not contain subtitle
information.
1 (Subpage) Display the subpage during Teletext page.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.

PC compatibility chart

Horizontal
Resolution
Frequency
640 g 480
VGA 31.5 kHz
800 g 600
SVGA 37.9 kHz
1024 g 768
XGA 48.4 kHz
WXGA 1360 g 768
47.7 kHz
VGA, SVGA, XGA and WXGA are registered trademarks of
International Business Machines Corporation.
11 12

USB Media Player

DivX® setup
This is the function to confi rm your registration code.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "
3 Press a /b to select "DivX ( R ) VOD", and then
press ENTER.
• Copy the 10 digit code down.
DivX ( R ) VOD Register
You need to visit the DivX main page to register your
TV. Please follow the online instruction to create DivX
account and DivX registration video download.
TELETEXT
Your registration is complete when you play the DivX
registration video on TV.
DivX ( R ) VOD Deregister
You can fi nd the deregistration code (8~10 digit).
Please use this code to deactivate on DivX website.
NOTE
• Visit vod.divx.com for more information about DivX® VOD.
Connecting a USB device
Connect a USB device to the TV.
CAUTION
• Do not disconnect a USB device from the TV while
transferring fi les, when a screen is in "USB" mode.
H Selecting modes
USB
PHOTO
1
Press INPUT to select the "Media" mode.
Vertical VESA
Frequency Standard
2
Press c / d to select "PHOTO", "MUSIC" or

60 Hz
"MOVIE", and then press ENTER.

60 Hz
3
Press c / d to select your USB directory, and

60 Hz
then press ENTER.

60 Hz
4
Press a /b/ c / d to select the desired folder,
and then press ENTER.
" (Setup).
INPUT 2
DIGITAL 3
AUDIO 3
INPUT 1 OUTPUT
ANT
AUDIO IN
(R/L) PC INPUT 6 ANTENNA
MUSIC MOVIE