Voice Meeting - Sony PCS-1600 Operating Instructions Manual

Voice Meeting

The system can connect to a normal phone to hold a meeting
using the sound only. (Voice Meeting)
The basic procedure is same as one with images and sound.
Note
When you have upgraded the system using the optional PCS-
UC161 Upgrade Kit and using a LAN, you cannot do the voice
meeting.
To start a voice meeting with unregistered remote parties
Set Line I/F to Telephone in the Manual Dial menu.
For details on the setting, see "Calling an Unregistered
Remote Party" on page 36.
The indication "VOICE ONLY" appears on the monitor
screen, and the local picture is displayed on the local monitor
screen.
To register remote parties for holding a voice meeting
Set Line I/F to Telephone in the List Edit menu.
For details on the registration, see "Calling a Registered
Remote Party" on page 39.
To set the audio protocol
Set up the Telephone item in the Dial Setup menu.
When you call, set Telephone to Auto. This automatically sets
to G.711 µ-law (NTSC); to G.711 A-law (PAL).
When you receive, the audio protocol setting is not required.
For details on the setup, see "Dial Setup menu" on page 89.
70
Chapter 3 Advanced Operation