Cancelling The Timer; Listening To Radio - Samsung MX-J630 User Manual

b. Press the ENTER (
Result: OFF is displayed for a few
seconds. You can set the tuner timer
recording switch-off time.
• The maximum tuner timer recording time is 5
hours.
• If the timer switch on and off times are identical,
the word ERROR is displayed.
• When there is no disc in or USB connected
to the MiNi Hi-Fi Component, if you select
"MP3/CD" or "USB 1 or USB 2", the MiNi Hi-FI
Component automatically selects "TUNER".
• You may use the ] , [ buttons or the
VOLUME/JOG control on the main unit instead
of the , or . button to adjust settings in
Steps 4 through 9.
• If the switch-on or -off time is the same as the
timer recording time, only the switch-on or -off
time is effective, and the timer recording time is
not applied.
• If the auto timer is turned on, the MP3/CD or
USB function may require an additional step to
be activated depending on the disc (or device).
It is better for you to select the tuner function
instead.

Cancelling the Timer

After you have set the timer, the unit will start
automatically at the time shown by the TIMER
indication on the display. If you no longer want
to use the timer, you must cancel it.
1. Press the TIMER ON/OFF button to cancel the
timer.
2. Press the TIMER ON/OFF button again to
restart the timer.
• When you select the OFF-TIMER mode, the
TIMER RECORDING and TIMER function are
not available.

Listening to Radio

You can store up to:
15 FM stations, 15 AM stations.
Using buttons on the Remote Control
1. Press the TUNER button to select FM or AM.
2. Tune to the desired station.
• Preset Tuning : Press the TUNING MODE button
to select PRESET, and then press TUNING [ or
] button to select the preset station.
• Automatic Tuning : Press the TUNING MODE
button to select MANUAL, and then press and
hold the TUNING [ or ] button to automatically
search for active broadcasting stations.
• Manual Tuning : Press the TUNING MODE button
to select MANUAL, and then briefly press the
TUNING [ or ] button to increase or decrease
the frequency incrementally.
16
English
) button.
Using buttons on the Main Unit
Selecting Mono or Stereo
Presetting Stations
Example : Presetting FM 89.10 in the memory.
1. Press the TUNER/AUX button to select FM or
AM.
2. Tune to the desired station.
• Preset Tuning : Press the STOP ( @ ) button to
select PRESET, and then press [ or ] button
to select the preset station.
• Automatic Tuning : Press the STOP ( @ ) button
to select MANUAL, and then press and hold the
[ or ] button to automatically search for active
broadcasting stations.
• Manual Tuning : Press the STOP ( @ ) button to
select MANUAL, and then briefly press the [ or
] button to increase or decrease the frequency
incrementally.
1. Press the MO/ST button.
• Each time you press the button, the sound
switches between STEREO and MONO.
• In a poor reception area, select MONO for a clear,
interference-free broadcast.
• This applies only when listening to an FM station.
1. Press the TUNER button to select FM or AM.
2. Press the TUNING MODE button to select the
<MANUAL> mode.
3. Press the TUNING [ or ] button to select
<89.10>.
4. Press the MEMORY button.
• FM followed by a flashing number appears in
the display. That number is the current preset
number.
5. Press the TUNING [, ] or the ,, . buttons
to scroll through and select a preset number.
• You can select a number from 1 to 15.
6. Press the ENTER (
• Press the ENTER (
disappears from the display.
• Number disappears from the display and the
station is stored in memory.
7. To preset another station, repeat steps 2 to 6.
• To tune to a preset station, press the TUNING [
or ] to select a channel.
• You can also use the [ or ] button on the
front panel instead of the TUNING [ or ]
button in step 3, 5, 7.
) button.
) button before number