Installation Steps - Panasonic KX-TVP50 Installation Manual

2.5 INSTALLATION STEPS

The following is an overview of the standard installation process using Digital Integration.
When necessary, other sections in this manual have been referenced for more detailed
descriptions or instructions.
1.
Obtain a list of current users, their extension numbers, their departments, and the type of
systems they use (mailbox, no mailbox, beeper, car phone, etc.).
2.
Assess your customers' needs before setting up the system. You will save yourself time later
by giving customers what they need up front. Ask the office manager how the VPS will be
used. Give examples.
Recommend that your customer use a word processor to log the greetings. You will find
these files much more easily than the worksheet pages if you need to make changes down
the road.
3.
Connect the power cord to the VPS.
CAUTION
The power supply cord is used as the main disconnect device. Ensure that the socket-outlet
is located/installed near the equipment and is easily accessible.
4.
Standard Initialisation (For Digital Integration Connection)
a)
Program the ports of the PBX for voice processing (see Section 4 INTEGRATING THE
VPS WITH THE PANASONIC KX-TA ANALOGUE PBX AND KX-TD DIGITAL
PBX).
b)
Unplug the power cord of the VPS.
c)
Plug station wire(s) from the PBX into VPS (see 2.7 CONNECTIONS).
d)
Connect the personal computer to the VPS with a Null Modem Cable (see
2.8.2 Connecting the RS-232C Cable).
e)
Set the DIP Switch to position 5.
f)
Plug in the power cord of the VPS.
g)
Wait until the "warning" appears on the screen.
Installation Manual
Program the KX-TA series, the KX-TD1232, or the KX-TD816 for Voice Mail
integration.
• KX-TA series
• KX-TD816, KX-TD1232
Programme may be performed on-site or at the office.
All memory is stored and will be retained when the unit is powered up as long as
the DIP Switch has been reset to position [0] prior to turning the unit off.
INSTALLATION
29