Sharp ROKU LC-43LB371U User Manual page 48

... and then cable TV channels.
Tip
Cable TV channels are channels from a cable TV provider that you can receive by
connecting their cable directly to your Sharp Roku TV (unscrambled NTSC, ATSC, and
QAM channels, if you're the kind of person who is interested in the details). In many
cases, your cable provider probably requires you to use their set-top box and connect
it to a different input, and then use the set-top box to tune your cable stations. In that
case, you can skip scanning for cable channels.
7 When the channel scans finish, your Sharp Roku TV shows the number of channels it added.
Scanning for channels can take several minutes.
Tip
Repeat the channel scan from time to time to make sure you are receiving all of the
latest channels. Broadcasters add and remove channels, move channels to different
parts of the spectrum, and change the power levels of their channels periodically.
Note
You'll have to repeat the channel scan if you remove the Antenna TV tile from the
Home screen or perform a factory reset. To repeat the channel scan at any time, go to
Settings >TV inputs >Antenna TV > Scan again for channels. Your antenna
reception and picture quality depend on the position of your antenna and on your
location relative to the antennas of broadcasters in your area.
LC-43LB371U/LC-50LB371U 43"/50" 1080p, 60Hz, LED Sharp Roku TV
43