Setting Key Learn [Key Learn] - Panasonic AG-HMX100P Operating Instructions Manual

[KEY]
Settings can be made in the same way as in the [KEY]
submenu of the [LUMINANCE KEY] menu ( page 8).
[CROP]
Settings can be made in the same way as in the [CROP]
submenu of the [PATTERN KEY] menu ( page 5).
[EFFECTS]
Settings can be made in the same way as in the [EFFECTS]
submenu of the [TRANSITION] menu ( page 4).
[BORDER]
Settings can be made in the same way as in the [BORDER]
submenu of the [CHROMA KEY] menu ( page 7).

Setting Key Learn [KEY LEARN]

The key learn function allows storing the key frame
settings (XYZ and key level) in memory and calling them to
reproduce the animation effect.
A key frame refers to a frame which defines changes of the
video used for animation. Several points where a shape
or position of an object is changed can be set in the key
frame to create smooth animation through interpolation
between the points.
With the [(BASIC) PATTERN KEY] menu, the rotary 1 control
can be operated to select [KEY LEARN] to set key learn
in the currently selected key pattern and register the key
pattern as a pattern in the range of No. 9000 to No. 9019.
Rotary 1 Rotary 2 Rotary 3
KEY EMPTY
LEARN 9000
9000-9019
To select the number applied to the
pattern in which key learn is set
Operate the rotary 2 control to select the pattern number in
the range of 9000 to 9019.
When the number of the pattern with key learn set is
selected, [SAVED] is diplayed. When the number of
the pattern with no key learn set isselected, [EMPTY] is
displayed.
To edit key learn
Select [SETUP] using the rotary 4 control, and press the
key.
The Key Learn Editing screen appears.
When the key is pressed with [SAVED] displayed for the
selected pattern, the message [OK?] appears.
Rotary 4 Rotary 5
SETUP
SETUP
CLR
ALL CLR
In this case, press the key again to display the Key
Learn Editing screen.
 NOTE
When key learn that is already registered in a pattern is edited,
the settings of the original pattern before key learn was set
are given priority. Thus, even if the pattern with key learn set is
called and [SETUP] is selected, no change is given to the base
pattern.
For key learn in a different pattern, it is recommended to use
a pattern number for which EMPTY is displayed or to delete
the existing key learn pattern once and set a new key learn
pattern.
Key Learn Editing screen
POS. X 128 Y 128
Z 196
EVENT ME TIME
00 1:00
E F
KEY
LEARN 9000
INSERT
BASIC
REPLACE
CLR KF
K FRAME
COPY 0
PASTE
EXIT
To select the key frame number
The key frame number is shown under [K FRAME].
When selecting the key frame number to copy the key
frame or specify a position for inserting the key frame,
select it from the registered key frame numbers using the
rotary 2 control while holding down the SHIFT key.
To set the key frame
Select the editing item including the key position (X, Y,
and Z), aspect, and time using the rotary 1 control, and
proceed with the setting of the key frame. To execute each
editing item, press the key.
INSERT: Inserts a key frame in the place of the next key
frame.
REPLACE: Replaces the current key frame.
CLR KF: Deletes the current key frame.
COPY: Copies the current key frame.
PASTE: Pastes a copied key frame by overwriting.
EXIT: Cancels the key learn editing mode and saves the
key learn settings.
To set the time up to the current key frame, a value is input
for [ME TIME] with the numeric keys or the TIME rotary
control.
The set time is shown under [ME TIME] on the setting
screen ( page Vol.1-20).
Upon completion of registration, select [EXIT] using the
rotary 1 control and press the
settings.
PATTERN INT
3001 WHT
K LEVEL
255
key to fix the key frame
9