Accessories / Cautions; Battery Cover - Kenwood KRF-V7070D Service Manual

KRF-V7070D/V8070D/X9070D/VR-7060/7070/7080
Accessories
FM indoor antenna (1)
(T90-0877-05)
There is a different shape of remote control in every area.
REMOTE CONTROL vs MODEL
MODEL ABBRI.
KRF-V7070D E7
KRF-V7070D-S E1
VR-7060 K6
VR-7060 P6
KRF-V8070D E8
KRF-V8070D-S E2
KRF-X9070D Y1
KRF-X9070D E9
KRF-X9070D-S E3
VR-7070 K7
VR-7070 P7
VR-7080 K8
VR-7080 P8
Cautions
Resetting the Microcomputer
The microcomputer may malfunction (unit cannot be operated, or
shows an erroneous display) if the power cord is unplugged while
the power is ON, or due to some other external factor. If this
happens, execute the following procedure to reset the
microcomputer and return the unit to its normal operating
condition.
• Please note that resetting the microcomputer will clear the contents
of the memory and returns the unit to the state it was in when it left
the factory.
Unplug the power cord from the wall outlet, then plug it
back in while holding down the POWER ON/STANDBY
key.
2

ACCESSORIES / CAUTIONS

AM loop antenna (1)
(T90-0893-05)
PARTS #

BATTERY COVER

A70-1623-05 A09-1274-08
7
A70-1623-05 A09-1274-08
A70-1622-05 A09-1274-08
A70-1622-05 A09-1274-08
8
A70-1623-05 A09-1274-08
A70-1623-05 A09-1274-08
A70-1619-05 A09-1275-08
A70-1621-05 A09-1274-08
A70-1621-05 A09-1274-08
9 A70-1620-05 A09-1274-08
A70-1620-05 A09-1274-08
A70-1619-05 A09-1275-08
A70-1619-05 A09-1275-08
RF remote antenna (1)
Refer to the table on this page below.
Memory back up function
Please note that the following items will be deleted from the unit's
memory if the power cord is disconnected from the AC outlet for
approximately 1 day.
• Power mode.
• Input selector settings.
• Picture output.
• Speaker ON/OFF.
• Volume level.
• BASS, TREBLE, INPUT level.
• TONE ON/OFF.
• LOUDNESS ON/OFF.
• Dimmer level.
• MD/TAPE settings.
• Listen mode setting.
• Speaker settings.
• SW RE-MIX ON/OFF.
• Distance setting.
Batteries (R6/AA) (2)
• Bass peak level.
• Input mode setting.
• M idnight mode setting.
• PRO LOGIC II mode setting.
• CS II mode setting.
• Broadcast band.
• Frequency setting.
• Preset stations.
• Tuning mode.
• THX mode.
• DSP mode.
• ACTIVE EQ mode.
• SPEAKER EQ mode.