Playing Discs Or Files; Quick View (Quick View With Audio); Forward And Reverse Scanning - Pioneer BDP-85FD Operating Instructions Manual

Chapter4
Playback
Playing discs or files
This section describes the player's ma in operations.
For the types of discs and files that can be played, see
page 8. Video, image and audio files recorded on discs
are played with
the Source function
(page 35).
1 Press
o
STANDBY/ON to turn on the power.
Turn the TV's power on and switch its input beforehand.
2 Press ~ OPEN/CLOSE to open the disc tray and
load the disc.
II
Note
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the disc.
Once reading is completed, the type of disc is
displayed on the player's front panel display.
• When a BD with usage restrictions set by a BD
recorder is loaded, the PIN code input screen
appears. In this case, input your PIN code.
3 Press 111>/11 to play the disc.
• To pause, press 111>/11 during
playback.
• To stop, press • during playback.
II
Note
• Some discs start playing automatically when the disc
tray is closed.
• BD-ROM/DVD-Video discs have parental lock
features. Input the password registered in the player's
settings to unlock the parental lock. For details, see
page 48.
• Some BD-R/-RE discs have playback protection. To
cancel the protection, input the password set for the
disc.
• If the picture and sound are not properly output,
Troubleshooting on page 55.
•!• If the disc menu is displayed
For some discs, the disc menu is displayed automatically
when playback starts. The contents of the disc menu and
the way to operate depend on the disc .
•!• Resuming playback from where it
was stopped (resume playback
function)
• When • is pressed during playback, the point at
which the disc stopped is stored in the memory.
When
111>/11 is pressed after
that, playback resumes
from that point.
• To cancel the resume playback function, press •
while playback is stopped.
II
Note
• The resume playback function is canceled
automatically in the following cases:
- When the disc tray is opened .
- When the file list window is switched.
- When the power is turned off. (For BDs and DVDs
this does not cancel the resume playback
function.)
• When you want to continue playback from a position
you specify to be played next time , see Continuing
playback from a spect{ied position (Continued Viewing
Playback) on page 34.
• The resume playback function cannot be used for
some discs.
Quick view (Quick view with
audio)
Aud io is being output while the video images are played
back at about 1.5 times the normal speed .
.- Press ..,. while playing back BD or DVD.
• If..,. is pressed during quick view, it will switch to
fast forward.
•!• To return to normal playback
• Press 111>/11.
II
Note
• You cannot pause during quick view. Please pause
after returning to normal playback.
• As for the tone during quick view, the output comes
via PCM regardless of the configuration of the main
body of the device.
• It is not possible to switch the audio during quick
view.
• Depending on the audio format, such as DolbyTreHD
and DTS-HD Master Audio,there might be no sound
output during fast-forward.
• For the output cond itions of each voice, please refer
to About how digital audio formats are output on
page 51.
Forward and reverse
scanning
.- During playback or quick view, press
~
or ..,.. .
• The scanning speed switches each time the button is
pressed. The speed steps depend on the disc or fi le
(the speed is displayed on the TV screen).
-
-
En