Sailor 6217 Installation Manual

INSTALLATION GUIDE
SAILOR 6217 VHF DSC - AIS Receiver
What's in the box?
Sun Screen Transceiver
Wheel Knob
(2 pcs.)
U-Mounting
Bracket
Flush Mount
Bracket (2 pcs.)
Screw M4x12 Screw ø3.9x19 Square Nut Screw M4x45
TORX 20 TORX 20 M4x7x2.2 TORX 20
(5 pcs.) (5 pcs.) (5 pcs.) (5 pcs.)
Very important information!
Do not remove the membrane.
If you remove the membrane the radio will not be waterproof.
Membrane
How to install the VHF flush mount
Square Nut M4x7x2.2 (4 pcs.)
Gasket Flush Mount Bracket (2 pcs.)
Max wall thickness 26mm
99-130248
Note!
- Firmly tie back and secure any wires not used in order to
avoid possibility for mutual shorting or shorting to ground!
- To ensure waterproof sealing:
If the surface isn't plane and/or rigid remove the gasket and
seal with silicone sealant between the VHF and the surface.
How to install the GPS and the Chart Plotter - Cable connections
99-130891-B
99-130891-B
Description
Description Pin
NMEA in+
NMEA in-
NMEA out-
NMEA in+ 1
NMEA out+
Mike 2 / Line in
NMEA in- 2
EAR 2 / Line out
Hook_PTT
NMEA out- 3
Battery Supply when radio is on
Internal GND = - Battery
NMEA out+ 4
Internal GND = - Battery
Mike 2 / Line in 5
EAR 2 / Line out 6
Hook_PTT 7
Battery Supply when radio is on 8
Internal GND = - Battery 9
Internal GND = - Battery 10
Installation Guide
INSTALLATION GUIDE
SAILOR 6217 VHF DSC - AIS Receiver
USER & INSTALLATION MANUAL
What's in the box?
SAILOR 6217 VHF DSC - AIS Receiver
Sun Screen Transceiver
Wheel Knob
(2 pcs.)
U-Mounting
Bracket
Flush Mount
Bracket (2 pcs.)
Screw M4x12 Screw ø3.9x19 Square Nut Screw M4x45
TORX 20 TORX 20 M4x7x2.2 TORX 20
(5 pcs.) (5 pcs.) (5 pcs.) (5 pcs.)
Very important information!
Do not remove the membrane.
If you remove the membrane the radio will not be waterproof.
Membrane
How to install the VHF flush mount
Gasket
Square Nut M4x7x2.2 (4 pcs.)
Gasket Flush Mount Bracket (2 pcs.)
User & Installation Manual
Max wall thickness 26mm
99-130248
Note!
- Firmly tie back and secure any wires not used in order to
avoid possibility for mutual shorting or shorting to ground!
- To ensure waterproof sealing:
If the surface isn't plane and/or rigid remove the gasket and
seal with silicone sealant between the VHF and the surface.
How to install the GPS and the Chart Plotter - Cable connections
Screw M4x12
TORX 20 (3 pcs.)
99-130891-B 99-130891-B
Description Description NMEA in+ Pin
NMEA in- NMEA out-
NMEA in+ NMEA out+ 1
NMEA in- EAR 2 / Line out Mike 2 / Line in 2
Cradle NMEA out- Battery Supply when radio is on Hook_PTT 3
NMEA out+ Internal GND = - Battery Internal GND = - Battery 4
Mike 2 / Line in 5
EAR 2 / Line out 6
Hook_PTT 7
Battery Supply when radio is on 8
Internal GND = - Battery 9
Internal GND = - Battery 10
Screw ø3.9x19
TORX 20 (3 pcs.)
Hand Microphone
Cap for LTW BD/BU Fuse Connection Cable,
Connector 6.3x3.2mm (10AT) 1 m
(2 pcs.)
Screw M4x45 TORX 20 (4 pcs.)
Connect to LOUD HAILER
(RED isolation on inner connector)
Connect to POWER +
A
A
B B
Connect to POWER -
Connect to EXT. SPEAKER
(WHITE isolation on inner connector)
Pin Wire color
Pin assignments
Wire color
1 Brown Front View
Pin assignments
2 Blue
Front View
3 White
Brown
4 Green
5 Yellow
8 1
Blue
6 Grey 7 9 2
7 Pink 6 10 3
5 4
White
8 Red
9 Black
Green
10 Orange - SCREEN (Drain)
Yellow
8 1
7 9 2
Grey
Pink 6 10 3
5 4
Red
Black
Orange - SCREEN (Drain)
How to install the VHF on desktop and overhead
How to install the VHF on desktop and overhead
USER & INSTALLATION MANUAL
SAILOR 6217 VHF DSC - AIS Receiver
Gasket User & Installation Manual
Tilting ±20°
Screw M4x12
TORX 20 (3 pcs.)
Cradle
TORX 20 (3 pcs.) Screw ø3.9x19
Hand Microphone
Drilling plan on desktop and overhead
Cap for LTW BD/BU Fuse Connection Cable, Power Cable
Connector 6.3x3.2mm (10AT) 1 m
(2 pcs.)
4 x M4 or hole for
self-tapping ø3.9
23mm 150mm
196mm
99-130249
Cable assembly for waterproof installation
Connect the 4 cable connections with rubber vulcanizing tape as shown .....
1. 3.
Screw M4x45 TORX 20 (4 pcs.)
Connect to LOUD HAILER
(RED isolation on inner connector)
Connect to POWER + (RED wire)
A A 2.
B B
Connect to POWER -
(BLUE wire)
Connect to EXT. SPEAKER (WHITE isolation on inner connector)
4.
Green, Pin 4, NMEA out+
Chart Plotter White, Pin 3, NMEA out-
Pin 1 Wire color Brown Wire color Front View Pin assignments Pin assignments
2 3 White Blue Front View GPS Blue, Pin 2, NMEA in-
4 Green Brown Brown, Pin 1, NMEA in+
6 5 Yellow Grey Blue 9 8 7 2 1
8 7 Pink White Red 10 6 5 3 4
9 10 Orange - SCREEN (Drain) Black Green GPS Cable (NMEA 0183)/
Chart Plotter Cable
Yellow 8 1 For waterproof installation use
Grey 7 9 2 rubber vulcanizing tape
Pink 6 10 3 99-131043-B
Red 5 4 Note!
Black Firmly tie back and secure any wires not used in order to avoid
Orange - SCREEN (Drain) possibility for mutual shorting or shorting to ground!
Drilling plan on desktop and overhead
Power Cable
Cable assembly for waterproof installation
Connect the 4 cable connections with rubber vulcanizing tape as shown .....
1.
(RED wire)
2.
(BLUE wire)
Chart Plotter
GPS
GPS Cable (NMEA 0183)/
Chart Plotter Cable
For waterproof installation use
Note!
Firmly tie back and secure any wires not used in order to avoid
possibility for mutual shorting or shorting to ground!
Tilting ±20°
4 x M4 or hole for
self-tapping ø3.9
23mm 150mm
196mm
99-130249
3.
4.
Green, Pin 4, NMEA out+
White, Pin 3, NMEA out-
Blue, Pin 2, NMEA in-
Brown, Pin 1, NMEA in+
rubber vulcanizing tape
99-131043-B