Tuner Operations; Listening To Fm/Am Radio - Sony HT-DDW885 Operating Instructions Manual

Tuner Operations

Listening to FM/AM radio

You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas to the receiver (page 26).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 2.
Area code
SP, AU
AR
E51
* The AM tuning scale can be changed (page 72).
Automatic tuning
VIDEO 1 VIDEO 2 VIDEO 3
SAT TV SA-CD/CD TUNER
2CH A.F.D. MOVIE
1 2 3
4 5 6
7 8 9
MEMORY DVD MENU
>10/
-
0/10 ENTER
CLEAR
DISPLAY TOOLS
V
B b
v
RETURN/EXIT MENU
TV CH –
PRESET – REPLAY ADVANCE
. < <
TUNING –
m H
TV
X
FM AM
50 kHz 9 kHz
50 kHz 10 kHz
50 kHz 10 kHz*
DVD
1
MUSIC
AMP MENU
AUTO CAL
D.TUNING
D.SKIP
FM MODE
FM MODE
MUTING
TV VOL
MASTER VOL
TV CH +
PRESET +
>
TUNING + 2
M
x
1
Press TUNER repeatedly to
select the FM or AM band.
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to
high; press TUNING – to scan from high
to low.
The receiver stops scanning whenever a
station is received.
Using the controls on the
receiver
1
Turn INPUT SELECTOR to select the FM
or AM band.
2
Press TUNING MODE repeatedly to select
"AUTO T.".
3
Press TUNING + or TUNING –.
In case of poor FM stereo
reception
If the FM stereo reception is poor and "ST"
flashes on the display, select monaural audio
so that the sound will be less distorted.
• To select monaural audio, you can
– press FM MODE repeatedly until the
"MONO" indicator lights up on the
display.
– set "FM MODE" in TUNER menu to "FM
MONO" (page 39).
• To return to stereo mode, you can
– press FM MODE repeatedly until the
"MONO" indicator on the display does not
light up.
– set "FM MODE" in TUNER menu to "FM
AUTO" (page 39).
55 GB