D-Link DKVM-IP1 User Manual page 96






3. After entering the above settings, click the Insert button to save the new rule.
4. Click the Apply button to save your changes.
You can also click the Append button to edit and existing rule, click the Replace button
to replace a rule, or click the Delete button to delete a rule. After making any changes,
click the Apply button to save your changes. Click the Reset to defaults to clear all
rules and return to the factory default settings.
Above: IP filter settings.
Rule #: Enter the rule number for the rule. This will determine the order in
which the rules are applied.
Starting IP: Enter the starting IP for the IP range the rule will apply to.
Ending IP: Enter the ending IP for the IP range the rule will apply to.
Group: Set which user groups this rule will apply to – all, super,
administrator, or user.
Action: Set the action to do if the IP is inside the designated IP range.
ACCEPT will accept connections from the IP address, and DROP will block
connections from the IP address.
95