In the field, a faulty image or a malfunction occurred because of condensation caused on the machine. It is assumed that this condensation occurred because

the machine was installed immediately after it was transferred from a cold place to a warm place.

Field Remedy

When the machine is transferred from a cold place to a warm place, leave it for more than 1 hour without unpacking to let it get to know the surrounding

temperature.

14.2.10.1.61 Combination of main drive assembly and models

iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /

[ Manual-related ]

Description

The combination of the main drive assembly and models are as follows:

FM2-0241: iR2270/2807 series models

FM2-1772: iR3570/4570 series models

14.2.10.1.62 How to hide message "Functions limited" on Copy screen: Finisher-Q3

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N / / iR4570N / iR2230 / / / iR3530 / / / / / / /

[ Manual-related ]

Description

In order to hide the massage "Functions limited" for the Finisher-Q3 from the Copy screen, set "Limited Functions Mode" to OFF under User mode >

Common Settings.

14.2.10.2 FAQ on Send Specifications

14.2.10.2.1 Address cannot be deleted

iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N / / iR4570N / iR2230 / / / iR3530

[ Manual-related ]

Description

An address cannot be deleted if it is registered in one-touch button or as a group. In such a case, delete the address from one-touch button or the group in

advance.

14.2.10.2.2 How to set machine to automatically select appropriate zoom ratio based on size of originals and selected record size when

scanning and sending different size originals: Auto zoom scanning

iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /

[ Manual-related ]

Description

This is a new function and is adopted first with this machine. This function enables you to set the machine to automatically select the appropriate zoom ratio

based on the size of originals and the selected record size when scanning and sending different size originals.

Field Remedy

[The Send screen > Scanning Settings > Option > Copy Ratio > Auto > select the desired record size > OK > Special Features > Different Size Originals >

select "Same Width" or "Different Width" > OK > Done > Resolution > select "300 x 300 dpi" or "600 x 600 dpi" > OK].

14.2.10.2.3 When sending different size originals, all originals are scanned at same zoom ratio even if machine is set to automatically

select appropriate zoom ratio based on size of originals and selected record size

iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /

[ Case in the field ]

Description

When you want to make the machine scan different size originals by automatically selecting the appropriate zoom ratio based on the size of each original and

the selected record size, you have to follow the field remedy below. In the field, however, the symptom occurred because only "Auto" was selected in "Copy

Ratio", and "Different Size Originals" was not selected as the special feature setting in the procedure. To prevent the symptom, be sure to follow the procedure

below.

Field Remedy

[The Send screen > Scanning Settings > Option > Copy Ratio > Auto > select the desired record size > OK > Special Features > Different Size Originals >

select "Same Width" or "Different Width" > OK > Done > Resolution > select "300 x 300 dpi" or "600 x 600 dpi" > OK].

14.2.10.2.4 Machine fails to automatically select appropriate zoom ratio based on size of originals and record size/Message "Fax TX is not

possible with this mode set." is displayed: When using different size originals mode in FAX transmission

iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /

[ Case in the field ]

Description

In the field, the symptom occurred because the direct sending was set. When setting machine to automatically select the appropriate zoom ratio based on the

size of originals and the record size in the different size originals mode, it is impossible to set the direct sending method or the manual sending method

simultaneously. Additionally, resolution has to be set to 300 x 300dpi or 600 x 600dpi.