NETGEAR FS518 Installation Manual
Fast ethernet switch with gigabit uplinks
Hide thumbs
Also See for FS518:
- User manual (50 pages) ,
- Installation manual (48 pages) ,
- Specifications (2 pages)
Related Manuals for NETGEAR FS518
Summary of Contents for NETGEAR FS518
- Page 1 Installation Guide for the Model FS518 Fast Ethernet Switch with Gigabit Uplinks NETGEAR, Inc. A Bay Networks Company 4401 Great America Parkway Santa Clara, CA 95054 USA Phone 888-NETGEAR M-FS518NA-0 June 1999...
-
Page 2: Statement Of Conditions
EN 55 022 Statement This is to certify that the Model FS518 Fast Ethernet Switch is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class A (CISPR 22). - Page 3 Canadian Department of Communications Radio Interference Regulations This digital apparatus (Model FS518 Fast Ethernet Switch) does not exceed the Class A limits for radio-noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications.
-
Page 4: Customer Support
Defective or damaged merchandise can be returned to your point-of-purchase representative. Internet/World Wide Web NETGEAR maintains a World Wide Web home page that you can access at the universal resource locator (URL) http://www.NETGEARinc.com. A direct connection to the Internet and a Web browser such as Internet Explorer or... -
Page 5: Table Of Contents
Contents Chapter 1 Introduction Benefits of Using Switching Technology .................1-1 Types of Ethernet Switches ....................1-2 Model FS518 Switch Overview ..................1-3 Features ..........................1-4 Chapter 2 Physical Description Front Panel ........................2-1 1000BASE-SX Fiber Ports ..................2-3 Normal/Uplink Push Button ..................2-3 LEDs ........................2-4 Rear Panel ........................2-6... - Page 6 Chapter 5 Troubleshooting Network Adapter Cards ....................5-2 Configuration ........................5-2 Switch Integrity .......................5-2 Autonegotiation .......................5-2 Appendix A Technical Specifications General Specifications ....................A-1 Appendix B Connector Pin Assignments RJ-45 Plug and Vista RJ-45 Connector ................. B-1 Duplex SC Plug and Duplex SC Connector ..............B-2 Appendix C Cabling Guidelines Fast Ethernet Cable Guidelines ..................
- Page 7 1000BASE-SX Fiber Connection .............2-3 Figure 2-4. Rear Panel of the Model FS518 Switch ...........2-6 Figure 3-1. Model FS518 Switch Used as a Desktop Switch ........3-2 Figure 3-2. Model FS518 Switch Used as a Segment Switch ........3-3 Figure 4-1. Attaching Mounting Brackets to the Model FS518 Switch .......4-3 Figure 4-2.
- Page 8 viii Figures...
- Page 9 Tables Table 2-1. LED Descriptions ..................2-5 Table 5-1. Troubleshooting Information ..............5-1 Table B-1. RJ-45 Plug and Vista RJ-45 Connector Pin Assignments ...... B-2 Table C-1. Electrical Requirements of Category 5 Cable ......... C-2 Table C-2. Electrical Requirements of Fiber Optic Cable ......... C-5 Table C-3.
- Page 10 Tables...
-
Page 11: Introduction
10 megabits per second (Mbps) or 100 Mbps. To relieve server and backbone bottlenecks, the Model FS518 switch also has two Gigabit Ethernet fiber uplink ports. -
Page 12: Types Of Ethernet Switches
Installation Guide for the Model FS518 Fast Ethernet Switch This improvement is accomplished very easily, with no change to the desktop (the network interface cards or software and the network wiring). As a result, the performance upgrade and the applications it enables are obtained very quickly and at a low cost. -
Page 13: Model Fs518 Switch Overview
The Model FS518 switch can be used to partition a 10 Mbps or 100 Mbps network to enhance the capacity of the network to support advanced applications. In addition, the switch provides a link between traditional 10 Mbps networks and faster 100 Mbps networks. -
Page 14: Features
Installation Guide for the Model FS518 Fast Ethernet Switch Features The Model FS518 switch has the following key features: • 16 autonegotiating (speed and duplex mode) 10/100 Mbps UTP ports to provide fast information exchange, resource sharing, and client or peer-to-peer communication using simple Category 5 unshielded twisted pair (UTP) cable •... - Page 15 Installation Guide for the Model FS518 Fast Ethernet Switch • Conformity to standards: — IEEE 802.3u 100BASE-TX standard — ISO/IEC 8802-3 and ANSI/IEEE 802.3 10BASE-T standards — IEEE 802.3z 1000BASE-SX standard • Rack Mount Kit provided for installing the switch in a standard 19-inch equipment rack or for...
-
Page 16: Physical Description
This chapter describes the hardware features of the NETGEAR Model FS518 Fast Ethernet Switch. Front Panel For easier management and control of the Model FS518 switch, familiarize yourself with the ports, LEDs, and Normal/Uplink push button on the front panel of the switch, as illustrated in Figure 2-1. -
Page 17: Figure 2-2. Vista Rj-45 Connector With Built-In Leds
Installation Guide for the Model FS518 Fast Ethernet Switch Figure 2-1 shows, the Model FS518 switch is equipped with 16 autosensing 10/100 Mbps Fast Ethernet UTP ports. The network access speed for the 10/100 Mbps ports is automatically sensed and displayed on the front panel by the 10 Mbps or 100 Mbps Link LEDs. -
Page 18: 1000Base-Sx Fiber Ports
Figure 2-1, allows you to select uplink (MDI) or normal (MDI-X) wiring for port 16 on the Model FS518 switch. This port is configured for normal wiring to connect to a PC when the push button is in the out position. When the push button is pressed in, this port is configured for uplink wiring to connect to another switch or to a hub, using a straight-through twisted pair cable. -
Page 19: Leds
Installation Guide for the Model FS518 Fast Ethernet Switch LEDs The LEDs on the front panel of the switch and two vista LEDs on each RJ-45 connector allow you to identify the following information: • Status of the power supply •... - Page 20 Installation Guide for the Model FS518 Fast Ethernet Switch Table 2-1 describes each LED on the front panel of the Model FS518 switch. Table 2-1. LED Descriptions Label Color Activity Description Power Green Power is supplied to the switch. Power is disconnected.
-
Page 21: Rear Panel
Installation Guide for the Model FS518 Fast Ethernet Switch Rear Panel As illustrated in Figure 2-4, the rear panel of the Model FS518 switch has a cooling fan and a standard AC power receptacle. 100-240 VAC 50-60 Hz 0.50A 9317FA... -
Page 22: Applications
Model FS518 Fast Ethernet Switch into your network. The Model FS518 switch is designed to provide flexibility in configuring your network connections. Each switch can be used as a standalone device or can be used with 10 Mbps, 100 Mbps, or 1000 Mbps hubs or other interconnection devices in various configurations. -
Page 23: Desktop Switching
Installation Guide for the Model FS518 Fast Ethernet Switch Desktop Switching Figure 3-1 illustrates the Model FS518 switch used as a desktop switch to build a small network that enables users to have Gigabit (1000 Mbps) access to a file server. MODEL... -
Page 24: Segment Switching
The Model FS518 switch can segment a network into multiple connected pieces, increasing overall bandwidth and throughput. Figure 3-2 illustrates the Model FS518 switch segmenting networks that are built with a NETGEAR Model FE508 Fast Ethernet Hub and a NETGEAR Model DS516 Dual Speed Hub. MODEL FS518... -
Page 25: Installation
Chapter 4 Installation This chapter describes the installation procedures for the Model FS518 Fast Ethernet Switch. Preparing the Site Before you begin installing the switch, prepare the installation site. Make sure the operating environment meets the physical requirements of the switch, as described in Appendix A, “Technical... -
Page 26: Installing A Switch
To qualify for product updates and product warranty registration, fill in the Warranty & Owner Registration Card within 30 days of purchase and return it to NETGEAR, Inc. Installing a Switch To install a switch on a desktop, on another flat surface, or in a rack: Unpack the switch. -
Page 27: Installing The Switch In A Rack
Installation Guide for the Model FS518 Fast Ethernet Switch Installing the Switch in a Rack To mount the switch in a standard 19-inch equipment rack, you need these tools and materials: • Two mounting brackets supplied from the Rack Mount Kit •... -
Page 28: Figure 4-1. Attaching Mounting Brackets To The Model Fs518 Switch
Installation Guide for the Model FS518 Fast Ethernet Switch Hold the switch with the mounting holes in the brackets aligned with the holes in the rack. 8945FA Figure 4-1. Attaching Mounting Brackets to the Model FS518 Switch Insert two pan-head screws with nylon washers through each bracket and into the rack. -
Page 29: Connecting Devices To The Switch
Note: Gigabit Ethernet fiber cable lengths are 260 m with 62.5 µm multimode fiber and 525 m with 50 µm multimode fiber. Ensure that the Tx (transmit data) Gigabit fiber connector of the Model FS518 switch is attached to the Rx (receive data) Gigabit fiber connector of the remote partner using one of the... -
Page 30: Verifying Installation
Installation Guide for the Model FS518 Fast Ethernet Switch 1000 Mbps 100 Mbps 10 Mbps 10 /10 bp s F a s th e rn e w it Gr ee llo w = CO = Lin E th er ne... -
Page 31: Troubleshooting
Chapter 5 Troubleshooting This chapter provides information about troubleshooting the Model FS518 Fast Ethernet Switch. Table 5-1 lists symptoms, causes, and solutions of possible problems. Table 5-1. Troubleshooting Information Symptom Cause Solution Power LED is off. No power is received Check the power cord connections for the switch and the at the hub. -
Page 32: Network Adapter Cards
Installation Guide for the Model FS518 Fast Ethernet Switch Network Adapter Cards Make sure the network adapter cards installed in the PCs are in working condition and the software driver has been installed. Configuration If problems occur after altering the network configuration, restore the original connections and determine the problem by implementing the new changes, one procedure at a time. -
Page 33: Technical Specifications
Appendix A Technical Specifications This appendix provides technical specifications for the Model FS518 Fast Ethernet Switch. General Specifications Network Protocol and Standards Compatibility ISO/IEC 802-3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3z 1000BASE-SX Data Rate 10 Mbps differential Manchester encoded, IEEE 802.3... - Page 34 Installation Guide for the Model FS518 Fast Ethernet Switch Physical Specifications Dimensions: (W) 13 by (H) 1.7 by (D) 8 in. (W) 33.0 by (H) 4.3 by (D) 20.3 cm Weight: 5.0 lb 2.3 kg Environmental Specifications Operating temperature: 0° to 40° C Storage temperature: -32°...
- Page 35 Installation Guide for the Model FS518 Fast Ethernet Switch Safety Agency Approvals CE mark, commercial UL listed (UL 1950) CSA certified (CSA 22.2 #950) TUV licensed (EN 60 950) Performance Specifications Frame filter rate: 14,800 frames/second, maximum on 10 Mbps port...
-
Page 36: Connector Pin Assignments
Connector Pin Assignments This appendix provides information about the RJ-45 plug, the RJ-45 connector, and the fiber connector used for the NETGEAR Model FS518 Fast Ethernet Switch with Gigabit uplinks. RJ-45 Plug and Vista RJ-45 Connector In a Fast Ethernet network, it is important that all 100BASE-T certified Category 5 cabling use RJ-45 plugs. -
Page 37: Duplex Sc Plug And Duplex Sc Connector
Installation Guide for the Model FS518 Fast Ethernet Switch Table B-1 lists the pin assignments for the RJ-45 plug and the vista RJ-45 connector. Table B-1. RJ-45 Plug and Vista RJ-45 Connector Pin Assignments Normal Assignment Uplink Assignment on Ports 1 to 8... -
Page 38: Appendix C Cabling Guidelines
Appendix C Cabling Guidelines This appendix provides specifications for cables used with the Model FS518 Fast Ethernet Switch. Fast Ethernet Cable Guidelines Fast Ethernet uses UTP cable, as specified in the IEEE 802.3u standard for 100BASE-TX. The specification requires Category 5 UTP cable consisting of either two-pair or four-pair twisted insulated copper conductors bound in a single plastic sheath. -
Page 39: Category 5 Cable
Installation Guide for the Model FS518 Fast Ethernet Switch Category 5 Cable Category 5 distributed cable that meets ANSI/EIA/TIA-568-A building wiring standards can be a maximum of 328 feet (ft) or 100 meters (m) in length, divided as follows: •... -
Page 40: Twisted Pair Cables
Installation Guide for the Model FS518 Fast Ethernet Switch Twisted Pair Cables For two devices to communicate, the transmitter of each device must be connected to the receiver of the other device. The crossover function is usually implemented internally as part of the circuitry in the device. -
Page 41: Patch Panels And Cables
If you are using patch panels, make sure that they meet the 100BASE-TX requirements. NETGEAR recommends Category 5 UTP cable for all patch cables and work area cables to ensure that your UTP patch cable rating meets or exceeds the distribution cable rating. -
Page 42: Fiber Optic Cables
Installation Guide for the Model FS518 Fast Ethernet Switch Fiber Optic Cables In North America, use EIA-569-A horizontal 62.5/125 µm multimode optical fiber cable (ANSI/EIA/TIA-492AAAA). Internationally, use ISO/IEC 11801 62.5/125 µm multimode optical fiber cable (IEC 793-2 type A1b, with 1.0 db/km attenuation and 500 MHz/km bandwidth). Refer to... -
Page 43: Index
Index Numbers full-duplex mode, 1-3 10/100 Mbps ports, 2-1 100 Mbps LEDs, 2-5 installation in a rack, 4-3 applications on a flat surface, 4-2 desktop switching, 3-2 verifying, 4-6 segment switching, 3-3 autonegotiation, 5-2 LEDs (table), 2-4 Link LED, 2-5 cable Category 5, C-1, C-2, C-4 crossover twisted pair, C-3... - Page 44 package contents, 4-1 uplink ports, 2-3 patch panel, C-2, C-4 wiring, 2-3, B-2, C-3 ports, 2-1, 2-2, 2-3 UTP cable, Category 5, C-1 Power LED, 2-1, 2-5 vista RJ-45 connector rear panel, 2-6 description, 1-4, 2-2 RJ-45 connector. See vista RJ-45 connector pin assignments, B-1 using with UTP cable, 2-2 RJ-45 plug, using for patch cables, C-4...