Wiper/Washer Switch - Hitachi ZAXIS 450LC-3 Operator's Manual

WIPER/WASHER SWITCH

The wiper and the window washer are operated using the
wiper/washer switch.
• Wiper
Turn the wiper/washer switch to the specified position to
operate the wiper.
OFF Position: The wiper stops and is retracted.
INT Position: The wiper operates intermittently at the
interval selected by the switch position as
described below.
INT (Slow): The wiper operates at 8-second interval.
INT (Mid): The wiper operates at 6-second interval.
INT (Fast): The wiper operates at 3-second interval.
ON Position: The wiper operates continuously.
f
NOTE: • When the front window (upper) is opened, the
wiper and washer will not operate. Even if the front
window (upper) is closed, the wiper and washer
will not operate until the lock pin on the right side
is placed in the lock position. If the front window
is opened while during operating the wiper, the
wiper will be retracted and the washer function is
deactivated.
• In case either the wiper or washer is operated
with the front window (upper) opened, or if front
window (upper) is opened while operating either
the wiper or washer, the front window opening
alarm buzzer will sound intermittently at one-
second intervals. Close the front window (upper).
• Washer
Press and hold the wiper/washer switch to squirt washer
fluid onto the front window. When the wiper/washer switch
is pressed for more than 2 seconds, the wiper operates until
the switch is released. When the wiper/washer switch is
released, the wiper automatically retracts. While operating
the wiper in the INT mode, when the wiper/washer switch
is pressed, the wiper operation mode is changed to the
continuous operation mode.
IMPORTANT: Washer motor may be damaged if wiper/
washer switch is held for more than 20
seconds, or continually operated with no
fluid in the washer tank.
OPERATOR'S STATION
1-52
Mid
Slow
Fast
M178-01-016
Wiper
M1U1-01-018