Advertisement
2.3 Notes
E8.If the distributary valve have worked for 150 seconds, and could not reach right
position during wash cycle,after the cycle is finished, the dishwasher will shut off all
loads, the alarm buzzer will ring for 30 seconds and the window will display "E8" at rate
of 1Hz in 30 seconds, and then display "E8" , drain water for 2 minutes meanwhile
Control Panel
1 1
1
Display window: Program remaining time, delay time,
running indicator, Program indicator, Salt and rinse
aid indicator, Error codes, etc.
2
Program button: To select one of the six programs. .
3in1 and half load function button: To select and show 3in1
3
and Half load functions. (Half load function means that the
lower spray arm does not run, so you should load the upper
basket only ).
Error Codes
When some malfunctions come on, the appliance will display error codes to warn you:
Codes
Meanings
E1
Longer inlet time.
E4
Overfilled.
2 3 4 5
Delayed Start Button: To preset the wash timer and delay
4
the starting time up to 24 hours. Every press of this button
increases the time by one hour.
（
for example: one press for an hour, two for two
hours... ...
）
5
Power switch: To turn on/off the power supply.
Possible Causes
Tap is not opened, or water intake is restricted,or water pressure
is too low.
Too much inlet water.
Hide quick links:
Advertisement
