How To Install The Outdoor Unit - Panasonic U-8ME1E8 Installation Instructions Manual

3. HOW TO INSTALL THE OUTDOOR UNIT

3-1.Transporting
When transporting the unit, have it delivered as close to the
installation site as possible without unpacking.
Use a hook for suspending the unit. (Fig. 3-1)
CAUTION
● When hoisting the outdoor unit, pass ropes through the left
and right holes of the bottom plate as shown in the Figs.
3-1-1 to 3-1-3. The angle between the rope and top panel
must be 70°or more so that the rope does not come into
contact with the fan guard. Use two lengths of rope 7.5
meters long or longer.
● Hang the rope at an oblique angle of the four corners of the
bottom plate. If it is hung at other areas, the rope becomes
loose and the outdoor unit will be damaged or you may be
injured.
● Use protective panels or padding at all locations where the
rope contacts the outer casing or other parts to prevent
scratching. In particular, use protective material (such as
cloth or cardboard) to prevent the edges of the top panel
from being scratched.
Model : 8 hp, 10 hp, 12 hp
Rope
Protective Protective
cardboard
cardboard
or cloth
or cloth
Detailed drawing A
Fan guard
A
Fig. 3-1-1
Model : 14 hp, 16 hp
Rope
Protective
cardboard
or cloth
Model : 18 hp, 20 hp
Rope
Fan guard
Protective
cardboard
or cloth
20
Detailed drawing B Detailed drawing B
Fan guard
B
Fig. 3-1-2
Detailed drawing C
Fan guard Fan guard
C
Fig. 3-1-3