03
Connections
Audio signals that can be output from
this unit's HDMI OUT terminal
• 44.1 kHz to 96 kHz, 16-bit/ 20-bit/ 24-bit 2-channel linear
PCM audio (including 2-channel downmixing)
• Dolby Digital 5.1-channel audio
• MPEG audio
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Connecting the FM antenna
Connect the FM antenna plug onto the center pin of the FM
antenna socket.
Y
PR
PB
OUT
COMPONENT
VIDEO
Note
• To ensure optimum reception, make sure the FM
antenna is fully extended and not coiled or hanging at
the rear of the unit.
14
En
FM wire antenna
(supplied)
This unit's rear panel
R
ANTENNA
L
FM
IN
UNBAL 75 Ω
LINE
Using external antennas
To improve FM reception
Use a F connector (not supplied) to connect an external FM
antenna.
ANTENNA
FM
UNBAL 75 Ω
Plugging in
CAUTION
• Do not use any power cord other than the one supplied
with this unit.
• Do not use the supplied power cord for any purpose
other than that described below.
Before making or changing the connections, switch off the
power and disconnect the power cord from the AC outlet.
After you've finished making all connections, plug the unit
into an AC outlet.
AC IN
To AC outlet
Power cord
F connector
SPEAKERS
O
R
L
OUT
C
V
HDMI
This unit's rear panel