Cleaning The Micr Unit; Troubleshooting; Paper Jams - Epson TM-S1000 User Manual

Cleaning the MICR Unit

Dirt on the MICR unit may cause frequent magnetic character reading
errors. Clean the MICR unit every six months or every 100,000 passes.
Use the TM-S1000 Utility or your application to clean the MICR unit.
Note:
For information on cleaning procedures, see the TM-S1000 Utility User's
Manual.
Do not use sticky cleaning sheets. They may cause a paper jam or machine failure.
Be sure to dispose of used cleaning sheets.
It is recommended to clean the MICR unit once per week or once every 2,000
checks for good reading results.

Troubleshooting

ERROR LED is Flashing or Lit
❏ Make sure that the covers are properly closed.
❏ If a paper jam has occurred, remove the jammed paper, referring to
the next section "Paper Jams."
❏ Turn off the scanner, and then turn it on after a while. If the error
persists, consult a qualified service person for repair.

Paper Jams

Open the scanner cover or franker cover to remove the jammed paper.
(See "Opening the Covers" on page 11 and "Opening the Franker Cover"
on page 11.)
TM-S1000 User's Manual 17
English