Step 1: Online Activation; Step 2: Con Guration And Powering Up; Connect Your Devices With Usb Cables - Cisco AT&T 3G MicroCel User Manual

Step 1: Activation
Work With your local TruVista representative for activating your MicroCell.
Note: As an added bene t, when placing a 911 call while connected to your 3G
MicroCell, the full location address you provide in your online activation will be sent to
local emergency responders. A built-in Global Positioning System (GPS) feature helps
deliver this functionality.
Write down your 3G MicroCell's
serial number
it for online activation and for
future reference.

Step 2: Con guration and Powering Up

How you con gure your 3G MicroCell is dependent on what equipment you currently use to connect to the Internet.
• If you have either a
• If you only have a
• If you have a modem, and a Wi-Fi router and want to prioritize your 3G MicroCell connection because other Internet
use impacts the 3G MicroCell's performance, follow our

Connect Your Devices with USB Cables?

If you currently use a USB cable
You have 2 cabling alternatives:
Alternative A: Remove the USB cable and install Ethernet cables according to Option A, B, or C as described above.
Note: This option requires a second Ethernet cable which is not included in your AT&T 3G MicroCell™ box.
Alternative B: Obtain USB-to-RJ45 adapters (not shown) and install one with the yellow Ethernet cable and the other with
your USB cable and then select from Option A, B, or C as described above.
• Place your MicroCell within 3 feet of a window, if possible.
• Make sure your MicroCell is at least 1 foot away from your gateway or modem and Wi-Fi router.
• Refer to FAQ 1.3 on page 16 for additional details on product placement.
8
as you will need
gateway or modem and Wi-Fi router
modem attached directly to your computer, follow
to connect your modem and computer you will no longer be able to do so.
Serial # (S/N):
, follow OPTION A on page 9
Priority Mode Con guration
-
.
OPTION B on page 10 .
which is OPTION C on page 11 .