Parts And Functions; Control Panel - Asus SV425 User Manual

Lcd display
Table of Contents

Advertisement

SV425 / SV465 / SV555 / SV427 / SV467 / SV557
2.

Parts and Functions

2.1.

Control Panel

POWER button
1
Use this button to turn the display on or put the display to
standby.
MUTE button
2
Switch the audio mute ON/OFF.
INPUT button
3
Use this button to select the input source.
[ ] button
4
Increase the adjustment while OSD menu is on, or increase
the audio output level while OSD menu is off.
• Used as [SET] button in the On-Screen-Display menu.
[ ] button
5
Decrease the adjustment while OSD menu is on, or
decrease the audio output level while OSD menu is off.
[ ] button
6
Move the highlight bar up to adjust the selected item while
OSD menu is on.
[ ] button
7
Move the highlight bar down to adjust the selected item
while OSD menu is on.
MENU button
8
Return to previous menu while OSD menu is on, or to
activate the OSD menu when OSD menu is off.
NOTE: "Keyboard Control Lock Mode" This function
completely disables the access to all Keyboard Control
9
MUTE INPUT
1
2
3
4
5
6
MENU
7
8
functions. To enable or disable the keyboard control
lock, press both [
continuously for more than 3 (three) seconds.
Remote control sensor and power status indicator
9
• Receives command signals from the remote control.
• Indicates the operating status of the display without
OPS:
- Lights green when the display is turned on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green
and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned
off
• Indicates the operating status of the display with OPS:
- Lights green when the display is on, but the OPS is off
- Lights blue when the display and the OPS is on
- Lights red when the display is in standby mode
- Lights amber when the display enters APM mode
- When {SCHEDULE} is enabled, the light blinks green
and red
- If the light blinks red, it indicates that a failure has been
detected
- Lights off when the main power of the display is turned
off
4
] and [
] buttons and hold down

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sv465Sv557Sv555Sv427Sv467

Table of Contents