Electrical Board Removal; Rear Cover Removal - Epson DLQ-3000+ Service Manual

DLQ-3000+

3.2.2 Electrical Board Removal

The electrical circuit for this printer consists of the C210 MAIN board and C124 PSB/PSE
board. You can remove this board by removing the rear cover only.

3.2.2.1 Rear Cover Removal

Step 1) Remove 2 screws (CBS, 3X12) securing the upper connector cover, and remove
the upper connector cover.
Step 2) Remove 2 screws (CBB, 3X12 and 3X40) securing the rear cover to the lower
housing.
Step 3) Take the rear cover out to the rear and then remove it.
Lower Housing Assembly
3-6
CBS Screws (3X12)
Figure 3-4. Rear Cover Removal
Rear Cover
CBB Screw (3X40)
Upper Connector Cover
CBS Screws (3X12)
Rev. A