NEC Aterm W300P Setup Manual

Multi-language manual
English

Names and Functions of Parts

<Top>
a POWER lamp (Power)
b ACTIVE lamp h RESET switch
(Communication
status display)
Strap hole
c AIR lamp
Straps for mobile devices can be attached.
(Wireless communication
status display)
a POWER lamp
Green (illuminated)
(Power)
Green (blinking)
Orange (illuminated)
( )

Red (illuminated)
Red (blinking)
Off
b ACTIVE lamp
Green (illuminated)
(Communication status
Off
display)
c AIR lamp
Green (illuminated)
(Wireless communication
Green (blinking)
status display)
Off
d WAN lamp
Green (illuminated)
Green (blinking)
Off
e WAN port
Connection for LAN ports provided in hotel rooms.
(WAN interface)
f Power connector
Use to supply power
<Specifications> DC5V (4.75V to 5.25V)  500mA
g SET button
Use when setting WPS
h RESET switch
Use when resetting
( ) The POWER lamp also illuminates in orange when automatically overwriting the firmware and setting information of

this product. Do not turn off the power. Doing so may damage the product.

Turning on the power

1
a Using an Ethernet cable, connect the WAN
port of this product and a LAN port located
within the hotel.
b Connect the power cable using one of the following methods and wait approximately 30 seconds.
Supplying power from a computer
Use the USB power cable supplied with this product.
Power connector
Supplying power using an AC adapter
An AC adapter is not supplied with this product.
 
Use the separately sold NEC-specifi ed AC adapter (product name: A3V9P1365/model number: AL1-003685), or
 
an AC adapter whose operability has been verifi ed.
 For information on how to purchase an NEC-specifi ed AC adapter, visit Shop@Aterm ( http://shop.aterm.jp/ ).
 For information about operability verifi cation, see the details of the verifi ed operability for the AC adapter in
[PRODUCT] - [AtermW300P] in "AtermStation". (As of October 2013)
Use an AC 100V (50/60Hz) power source when using the AC adapter.
 
Power connector
c Power and WAN lamps illuminate in green.
 Aterm is a registered trademark of NEC Corporation.  Windows is a registered trademark of Microsoft Corporation in the United States and other countries.  Mac OS, OS X and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.  The iPhone trademark is used under license from AIPHONE CO., LTD.  "Android" is a trademark
or registered trademark of Google Inc.  MEDIAS is a trademark or registered trademark of NEC CASIO Mobile Communications, Ltd.  Other company names, product names, services names, etc., are trademarks or registered trademarks of their respective companies.
© NEC Platforms, Ltd. 2013-2014 Reproduction, revision and distribution of copies are prohibited without the permission of NEC Platforms, Ltd.

Setup Guide

AM1-002409-002
August 2014
<Bottom> <Sides>
d WAN lamp
e WAN port
(WAN interface)
Power is on
Setting using WPS
Updating firmware version
Wi-Fi setting using WPS is completed
WPS failed
Preparing to reset
Wi-Fi setting using WPS failed
Power is off
Internet communication is established
Internet communication is not established
Wireless communication (2.4 GHz) is available
Sending and receiving data wirelessly (2.4 GHz)
Not using Wi-Fi
Link with the WAN port is established
The WAN port is communicating
Link with the WAN port is not established
Micro-USB type B
LAN port provided
in a hotel room
Power outlet
POWER lamp
illuminates in
green
 Support by the information center is provided only in Japanese.
 This product (including the software) is designed with Japanese specifi cations, and is not compliant with non-Japanese standards. NEC assumes no
responsibility for any use of this product outside Japan. NEC does not offer any overseas maintenance or technical support for this product.
 This guide provides the setup procedures in four languages. For the product specifi cations, cautions and other information that are not covered in this guide,
please refer to the "Tsunagikata-Guide" (in Japanese) and "AtermStation" (in Japanese).
Connecting to W300P with a Wi-Fi connection
2
Set your wireless LAN device using the network name (SSID) and encryption key found on the
bottom of this product to connect with a Wi-Fi connection.
f Power connector

For Windows 8

a Display the desktop screen.
b Click the network icon on the
bottom right of the screen.
g SET button
c Select the network name (SSID) of this
product and click [Connect].
d Enter the encryption key (single-byte
lowercase characters) of this product and
click [Next].
For an iOS device
The following example is for iPhone running
iOS 6.1.
a Tap [Settings].
b Tap [Wi-Fi].
c Set [Wi-Fi] to [ON] and tap the network
name (SSID) of this product.
WAN lamp
WAN port
d Enter the encryption key (single-byte
lowercase characters) of this product and
tap [Join].
WAN lamp
illuminates in green
For Mac OS
The following procedure is for OS X v10.8.
a From the Apple menu, click [System
Preferences...] - [Network].
b Select [Wi-Fi].
c Select the network name (SSID) of this
product.
d Enter the encryption key (single-byte
lowercase characters) of this product and
click [Join].
For an Android device
The following example is for MEDIAS
running Android 4.2.
a Tap [Settings].
b Set [Wi-Fi] to [ON] and tap [Wi-Fi].
c Tap the network name (SSID) of this
product.
d Enter the encryption key (single-byte
lowercase characters) of this product and
tap [Connect].