NComputing Xtenda Quick Installation Manual

©NComputing Co., Ltd. All rights reserved.
NComputing is registered trademarks of NComputing Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Intel and Pentium are registered trademarks of Intel Corporation.
Information in this quick installation guide is subject to change
without notice.
www.ncomputing.co.kr
www.ncomputing.com
1.
Install the Xtenda PCI card
on the Host PC
step 1
Turn off the computer and then
remove the computer cover.
step 2
Insert the Xtenda PCI card
and tighten the screw.
step 3
Replace the
computer cover.
2.
Connect the PCI card to Multi Box
using a LAN cable
The use of a 16ft.(5m) or longer common *LAN
cable for the connection may affect the picture
quality of the monitor which is connected to
the Multi Box.
To use of Category 6 type LAN cable, which
has a high class specification,
is recommended in order to
achieve the best picture quality
of each Multi Box.
*LAN cable in this guide means
CAT5e cable or CAT6 cable and
more.
Please use the Direct LAN cable*.
Please do not connect to any network devices.
* The Direct LAN cable is that the order
of line color both sides of connector
is the same each other.
The CD for the Installation
of the Program
Xtenda Multi Box Xtenda PCI Card
the order of
line color
both sides
of connector
is the same
each other.
After finishing installing the Xtenda hardware, see the back of this guide in order to install the Xtenda software.
User's Guide(Optional) or
Quick Installation Guide(Optional)
A Bracket for PCI Card
Low Profile Bracket
(Optional)
3.
Connect the peripheral devices to
Multi Box.
Mouse
Speaker
Keyboard
- We recommend that you
use a speaker with a
booster inside.
Xtenda

Quick Installation Guide

To ensure your using the Hardware and the Software of
Xtenda have to be installed in your Host PC. For installation Xtenda
on your system, see the following procedure in this guide.
4 .
Xtenda driver installation
step 1
Installation of Xtenda Bus Enumerator
step 2
Installation of Graphic Controller for
Port 1 of PCI card
step 3
Installation of Graphic Controller for
Port 2 of PCI card.
step 4
Installation of Graphic Controller for
Port 3 of PCI card.
5 .
Xtenda application program
installation
Type the serial number and the activation key
for every Xtenda Multi Box.
6 .
Registration of the Xtenda via

the Internet

We recommend to register now to get the
latest costfree update.
The peripheral devices are optional.
Monitor Host PC
Back
Page