Edge Cropping - Fujitsu FI-6010N Operator's Manual

6.9.18 Edge Cropping

For scanned data, the width of the area for edge cropping can be adjusted, so that unwanted sec-
tions are not scanned.
If using edge cropping, the width of the edges to be cropped can be adjusted with this setting.
1. On the "Scan Settings" screen, select the [Advanced] tab.
2. Press the [Edge Cropping] button.
The "Edge Cropping" screen appears.
3. If edge cropping is to be used, enter the width of the edges to be cropped.
Edge Cropping Setup
Off
On
Scan without cropping edges.
Scan and crop edges.
Enter a value for Top/Bottom and Left/Right from 0 to 50.
Enter values in units of 1mm.
fi-6010N Network Scanner Operator's Guide
6.9 Setting the Scan Options 6.9 Setting the Scan Options
Status
6
391