Preparation 2 - Placing Copy Paper; Acceptable Media Types - Toshiba e-studio 223 Operator's Manual For Copying Functions

1 PREPARATION

Preparation 2 - Placing Copy Paper

Place copy paper in an appropriate paper source before you start copying.

Acceptable media types

Standard size plain paper (64 to 80 g/m
Paper Feed Unit (optional). See the table below for the details.
Feeder
Drawers of
the equip-
ment and
Paper Feed
Unit
(optional)
Bypass tray Plain paper
*1 "Maximum sheet capacity" refers to the maximum number of sheets when TOSHIBA-recommended
paper is used. See the following page for the TOSHIBA-recommended paper:
P.35 "Recommended paper"
*2 50 to 63 g/m
*3 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other
than the TOSHIBA-recommended ones are used, this could cause an equipment malfunction.
*4 13"LG size paper can be used only in equipment for the EU.
You cannot mix various paper sizes in one drawer.
"LT format" is the standard size for only use in North America.
Abbreviations for LT format sizes:
LT: Letter, LD: Ledger, LG: Legal, ST: Statement, COMP: Computer
34

Preparation 2 - Placing Copy Paper

Media type
Plain paper A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
2
(64 - 80 g/m )
LT format:
LD, LG, LT, LT-R, ST-R, COMP, 13"LG
A/B format:
A3, A4, A4-R, A5-R, B4, B5, B5-R, FOLIO
2 *2
(64 - 80 g/m )
LT format:
THICK PAPER 1
LD, LG, LT, LT-R, ST-R, COMP, 13"LG
2
(81 - 105 g/m )
THICK PAPER 2
2
(106 - 163 g/m )
Tracing paper
2
(75 g/m )
Sticker labels
*3
A4 only
Transparencies
2
paper can be used if it is set on the bypass tray sheet by sheet.
2
) can be used for the drawers in the equipment and the
Paper size
Maximum sheet
*1
capacity
250 sheets (64 g/m
250 sheets (80 g/m
*4
100 sheets (64 g/m
100 sheets (80 g/m
1 sheet
*4
2
(81 - 105 g/m )
1 sheet
2
(106 - 163 g/m )
1 sheet
1 sheet
1 sheet
2
)
2
)
2
)
2
)