Troubleshooting Paper Abrasion And Blurry Images (Head Height) - Canon iPF755 User Manual

Adjustments for Better Print Quality
9.
Open the Top Cover and move the Angle Adjustment Lever to match the number (or the square) of the straight-
est set of lines.
If no single set of lines is perfectly straight, move the Angle Adjustment Lever to a position between the num-
bers (or between the number and the square) of the two sets of lines that are least misaligned.
10.
Close the Top Cover.
The Printhead is now straight, and adjustment is complete.
8

Troubleshooting Paper Abrasion and Blurry Images (Head Height)

If the Printhead rubs against paper during printing, adjusting the Printhead height may improve results.
If image edges are blurred, it may help to lower the Printhead.
Note
• Raise or lower the printhead, depending on the nature of the problem.
(See "Paper rubs against the Printhead.")
(See "The edges of the paper are dirty.")
(See "Image edges are blurred or white banding occurs.")
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (
626
2.
Press the OK button.
The Paper Menu is displayed.
Troubleshooting Paper Abrasion and Blurry Images (Head Height)
> Adjusting the Printhead
Note
• If the Tab Selection screen is not displayed, press the Menu button.
>
→P.783
→P.783
→P.787
).
iPF755