Error Message List - Brother P-Touch 9600 User Manual

ERROR MESSAGE
4 DIGITS MINIMUM!
16 LINE LIMIT!
50 LINE LIMIT
REACHED!
BATTERIES WEAK!
(PT-9600 only)
BUFFER EMPTY!
BUFFER FULL!
CHARGE BATTERIES!
(PT-9600 only)
CLOSE CASSETTE
COVER!

ERROR MESSAGE LIST

CAUSE
● This message appears if less
than the minimum four digits
are entered as the barcode data.
● This message appears if 16 lines
have already been entered in a
text block of text when you
press n.
● This message appears if you
delete text, causing the number
of lines in a block to exceed the
16-line limit.
● This message appears if 50 text
blocks have already been
entered when you hold down
d and press n.
●
This message appears when the
installed Ni-MH battery has
become weak.
● This message appears if no text
has been typed in when you try
to print or use the Numbering
function, Repeat printing func-
tion or Layout preview function.
● This message appears if you try
to add a character, a space, a
new line, a new block, a sym-
bol, an accented character or a
barcode after the maximum
number of characters has
already been entered.
● This message appears when the
rechargeable Ni-MH battery has
reached a low voltage.
● This message appears if the tape
compartment cover is open.
ERROR MESSAGE LIST
SOLUTION
● Enter a minimum of four
digits before pressing n.
● Limit the number of lines
in a text block to 16.
● Adjust the number of lines
so that the block will not
have more than 16 lines.
● Limit the number of text
blocks to 50.
●
Recharge the battery or
use the AC adapter.
● Type in some text before
trying to perform any of
these operations.
● Delete some existing text
before trying to add any
more.
● Recharge the battery or
use the AC adapter.
● Close the compartment
cover.
55