Canon 1130 Service Manual page 220

18) Remove the threes screws [14], and
detach the photosensitive drum butting
block (rear) [15].
19) Lift the stopper plate [16], and remove
the scraper plate [17].
20) Avoiding the protrusion [18] on the
flange at the rear of the photosensitive
drum, slide out the photosensitive drum
unit slowly.
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
[15]
[14]
Figure 6-610
Figure 6-611
[18]
Figure 6-612
[17] [16]
6-55