Setting Up The Network Interface Unit; Connecting The Network Interface Unit To A Network - Epson Network Interface Unit User Manual

Network Interface Unit User's Guide

Setting Up the Network Interface Unit

Connecting the Network Interface Unit to a Network

A
Turn off the product and disconnect the USB cable.
B
Connect the Network Interface Unit to the scanner using the USB cable.
C
Connect a network cable to the Network Interface Unit.
Note:
❏ You must use a category 5e or higher shielded twisted-pair cable to connect the Network Interface Unit to
prevent malfunction.
❏ The network cable is not supplied with the product.
Setting Up the Network Interface Unit
9